771286
29
Zoom out
Zoom in
Previous page
1/56
Next page
29 / 56
14. The Wi-Fi connection between smart device/app and weather station will be established automat-
ically. This may take a few minutes. After successful connection, the icons for "Wi-Fi" and for the
signal strength as well as all available weather data will be displayed on the weather station's
screen.
15. NOTICE!In some cases, restrictions on the Internet connection (e.g. connection restrictions
due to firewall settings) may mean that a correct Wi-Fi connection could not be established.
In these cases an "Error" message is displayed in the app. Read the chapter "Troubleshoot-
ing" to find various ways to solve any problems.
11 WeatherSense App Troubleshooting Q&A
Q: Why can’t I connect my weather station to my WIFI network during set up?
Make sure your phone is connected to a 2.4GHz WIFI network. The weather station currently only
supports 2.4GHz WIFI network during configuration.
Try moving your WIFI router closer to your weather station (98ft / 30m visible range is best).
Make sure you have turned off MAC address filtering in your router.
Make sure you don’t have more than 10 devices connected to your router.
Close and reopen the WeatherSense app.
Clear your app cache.
Hard reset your weather station device, by taking off batteries or removing AC/DC power. Wait for
1 minute and plug back in.
Make sure the WIFI password you’re inputting is correct.
Q: How do I change my WIFI network to a 2.4GHz WIFI network?
Make sure your router is a dual band router (most dual band routers support both 5GHz and
2.4GHz networks).
Under your phone settings, set your WIFI network to 2.4GHz. Most 5GHz WIFI are suffixed by
“_5G”, so select the network that does not have “5G” in it’s name.
Some routers hide the 2.4GHz WIFI network. If you have trouble finding or setting up your 2.4GHz
network, please contact your router manufacturer for support.
Q: After moving a WIFI weather station to another room or space, the weather station is ap-
pearing as offline. WIFI and signal symbol are blinking on the weather station display. Why is
this happening?
Check to make sure the WIFI weather station device isn’t placed too far from your WIFI network
router. It must be within 98ft/30m visible range from the router.
Check to make sure the wireless network has not changed and it is functioning normally.
If you place the weather station to a new place with a new wireless network Router, then re-config-
ure the weather station with the new network.
Q: Why can’t I locate my town in the app during set up?
Make sure your phone’s Location Services are turned on and allowed for this app.
Make sure that your current location can be successfully located in the map. Some cities may fail
to locate because there is no corresponding success in the app. You can manually move the loca-
tion or be automatically positioned to a large administrative level city.
Q: Why does the pairing process always fail? Why can't I find a “weathertype” device in the
device list during the pairing process?
29


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bresser 7001040 - WIFI 4Cast at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bresser 7001040 - WIFI 4Cast in the language / languages: English, German, French as an attachment in your email.

The manual is 2.72 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Bresser 7001040 - WIFI 4Cast

Bresser 7001040 - WIFI 4Cast User Manual - Dutch - 20 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info