632904
16
Zoom out
Zoom in
Previous page
1/72
Next page
16
BRESSER Connect
Home Automation with Remote Access for iOS & Android Devices
Thank you for purchasing the new BRESSER Connect system. This instrument will allows you to use your iOS / Android
devices to monitor and control your home sensors and power devices wirelessly via your home network or Internet. Read
this manual carefully to fully explore the features and functions of the new product
Scope of deliveries (Fig. 1)
Before installing please check the completeness of the scope of deliveries:
A) Wind meter with mount brackets and screws
B) Rain gauge with cement dowel and fixing screws
C) Thermo-hygromneter
D) Soil moisture sensor
E) Energy meter socket
F) Gateway
G) Mains adapter
User manual
Instruction Manual
To operate the devices contained in the set, the following batteries are required (not included):
4 x AA, 2 x AAA, 1 x CR2450, 3 x LR44
Parts Scheme (Fig. 2 and 3)
Basic functions:
1. Gateway: Communicates between the remote devices (sensors & sockets) and the WiFi router
2. Wind meter: Provides wind speed/ direction, temperature & humidity measurements
3. Rain gauge: Provides rainfall measurements
4. Thermo-hygrometer: Provides temperature & humidity measurements
5. Soil moisture sensor: Provides soil moisture, soil temperature & air temperature measurements
6. Energy meter socket: Provides energy, electricity power & cost measurements
Additional tools needed for installation
Small Phillips screwdriver
Hexagonal Key
Electric drill
Pencil
Level
Mast, 1 – 1.25 inch (2.54 – 3.18 cm) in diameter (to mount the wind meter)
App download (BRESSER Connect)
Please download and install the app from Apple Store (iOS device) or Google Play (Android device).
Name of the app: BRESSER Connect
Note: Please setup the WiFi gateway before the other sensors, then setup the sensor one by one. (Do not set up multiple
sensors at the same time!)
Setting up the gateway (Fig. 2, 1)
1) Connects LAN cable of the gateway to one of the available port on the back of your WiFi router
2) Connects the 4.5V adapter to the gateway and the green LED will flash quickly for initial startup. Wait until the LED
stops the continuous flashing and the startup is completed
(Make sure the WiFi router is turned on before switching on the gateway)
16


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bresser 70-20000 Connect Set at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bresser 70-20000 Connect Set in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 4,16 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info