632882

Bresser 70-00003 TemeoTrend AI Manual

12
Zoom out
Zoom in
Previous page
1/36
Next page
12
Low battery warning
When batteries need to be replaced the respective low battery indicator will be shown near the
indoor temperature display (batteries for main unit) or near to the outdoor temperature (batteries for
remote sensor).
USING TABLE STAND OR WALL MOUNTING
The main unit has a removable table stand, which - when connected - can support the unit on a flat
surface. It is possible to remove the stand and mount the unit on a wall using the recessed screw hole.
The same applies to the remote unit; it can be placed on a flat surface or mounted on a wall using the
recessed screw hole.
OPERATION
Receiving measurements and time signal
Once batteries are placed in the remote unit, it will start transmitting temperature readings at roughly
45 second intervals. As soon as batteries are installed in the main unit it will start searching for a signal
from the remote sensor for about 3 minutes. Upon successful reception of the signal, the outdoor
temperature will be displayed on the main unit. The main unit will automatically update its readings at
about 45 second intervals.
Subsequently, the main unit will attempt to receive the DCF77 radio signal. The reception symbol flashes.
When the time signal is received after 3-5 minutes, the current time and date appear in the display. The
reception symbol will now be shown permanently in the display. Date and time are automatically updated
daily at 2:05 o’clock (CET) by the main unit.
Temperature and humidity
1. Press and hold the MAX/MIN button for 2 seconds to switch the display between °C and °F.
2. Once the battery is installed, the main unit will start displaying the interior measurement information.
The main unit will display the information from the remote sensor for the first time approximately 3
minutes after the power supply was established.
Max/Min records of temperature and humidity
1. Pressing and releasing the MAX/MIN button in short intervals repeatedly makes the display alternate
between the current temperature and humidity as well as MIN/MAX recordings.
2. The MIN/MAX temperature and humidity values will be recorded automatically.
3. The MIN/MAX temperature and humidity records automatically will be reset at 0:00 o’clock (12:00
a.m.) every day.
Current weather and weather trend
The weather forecast is depending on the fluctuation of temperature and humidity. From these values
a weather forecast for the next 6 hours is calculated.
Current weather Temperature, humidity and weather trend
Sunny
Partly cloudy
Cloudy
Rainy
Rising
Steady
Falling
Air pressure
The values for air pressure will be updated each hour and will be displayed as a numerical value between
… 12 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bresser 70-00003 TemeoTrend AI at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bresser 70-00003 TemeoTrend AI in the language / languages: English, German, French, Italian, Spanish as an attachment in your email.

The manual is 1,4 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info