632882

Bresser 70-00003 TemeoTrend AI Manual

11
Zoom out
Zoom in
Previous page
1/36
Next page
11
DE
GB
FR
IT
ES
Garantie / Warranty
(4) SET button – Switch between time and alarm mode. Press and hold for 2 seconds when in the
appropriate mode to enter setting mode for time and date as well as changing the alarm time.
(5) MAX/MIN button – Allows switching between the MIN/MAX values. Press and hold for 2
seconds to alternate between °Celsius (°C) and °Fahrenheit (°F).
(6) CHANNEL button – Press ‘channel’ repeatedly to successively display the information of the
different remote sensors (optional: up to 3 outdoor sensors can be connected). Press and hold
for 2 seconds to initialize transmission of the RC signal from the remote sensor.
Note:
The function for changing the display is only activated when at least two remote sensors are connected.
(7) SNOOZE button – Press to suspend the alarm.
(8) Wall-mount recessed hole –
This hole makes it possible to mount the main unit on a wall.
(9) Battery compartment
(10) Table stand – Foldable. Add if station is to be placed on a flat surface.
Remote sensor (Fig. 3)
(11) Outdoor temperature
(12) Battery compartment
(13) CH switch – Select a channel (1-3).
(14) Wall mount hole –
This hole makes it possible to mount the remote sensor on a wall.
(15) TEST button – Press for a transmission test.
(16) °C/°F button – This button selects between Celsius (°C) and Fahrenheit (°F).
(17) Table stand – Foldable. Use this stand to place the device on a flat surface
BEFORE YOU START
IMPORTANT!
1. Insert batteries for remote units before doing so for the main unit.
2. Place the main unit as close as possible to the remote unit.
3. Position the remote unit and main unit within the effective transmission range.
When changing batteries always change batteries in the main unit as well as all remote units and
replace them in the correct order, so the remote connection can be re-established. If batteries are
exchanged in only one of the devices (i.e. the remote sensor) the signal can’t be received or can’t be
received correctly.
Note, that the effective range is vastly affected by building materials and position of the main and
remote units. Due to external influences (various RC devices and other sources of interference), the
maximum distance can be greatly reduced. In such cases we suggest to position the main unit and
the remote sensor at other places. Sometimes all it takes is a relocation of one of these components
of a few inches!
Though the remote unit is weather proof, it should be placed away from direct sunlight, rain or snow.
POWER SUPPLY
Remote sensor
1. Open the battery compartment door.
2. Move the CH switch to the position (1-3) that corresponds with the channel which will be used for
transmission (select channel 1 if only one remote sensor is connected).
3. Install 2 batteries (AAA size 1.5V) strictly according to the polarities shown.
4. Reinsert the battery compartment door.
Main unit
1. Open the battery compartment door.
2. Install 2 batteries (AA size 1.5V) strictly according to the polarities shown.
3. Reinsert the battery compartment door.
… 11 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bresser 70-00003 TemeoTrend AI at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bresser 70-00003 TemeoTrend AI in the language / languages: English, German, French, Italian, Spanish as an attachment in your email.

The manual is 1,4 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info