632885
16
Zoom out
Zoom in
Previous page
1/44
Next page
16
2. If the time signal receiving fails again, the time
can be set manually.
Manual time setting
1. Press and hold the SET button in normal display
mode for 2 seconds to enter into time setting
mode.
2. The figure to be set will start flashing.
3. Press DOWN or UP to change the value.
4. Press SET button to confirm and go to the next
value to be changed.
5. The setting order is year >> month >> date
>> language selection for display of the day
(abbreivaited) >> time zone >> 12/24hr >> hour
>> minute >> save and exit.
6. If there is no operation for 30 seconds, the
existing setting will be saved and the device
returns to normal display mode. Press SET
button again to confirm and exit setting.
Alarm setting
1. Press and hold the ALARM button in normal
display mode for 2 seconds to enter into alarm
time setting mode.
2. The figure to be set will start flashing.
3. Press the DOWN or UP button to change this
setting.
4. Press the ALARM button to confirm and go to
the next setting.
5. The setting order is hour >> minute >> save and
exit.
6. Press ALARM again to confirm and exit setting
mode.
7. Press SET button to turn on or off the alarm,
When the alarm is activated, the icon is
showed on the screen. When this alarm bell
symbol is not displayed the alarm is off.
8. The alarm sounds for a total of 2 minutes and will
change characteristics along that time.
Snooze/light function
1. When alarm is ringing, you can press the
SNOOZE/LIGHT button to silence it for 5
minutes. The icon
will now flash as well.
2. Press any other button to turn off the alarm. The
alarm will activate again after 24 hours at the set
time.
3. During normal operation mode, a press of the
SNOOZE/LIGHT button turns on the backlight
for 20 seconds.
Temperature buzzer setting
1. Press and hold the DOWN button in normal
display mode for 2 seconds to enter into
temperature buzzer setting.
Note: Make sure that you have set the correct
channel for the desired sensor.
2. Press the DOWN or UP button to turn on or off
the temperature buzzer.
3. Press the SET button to confirm and go to next
setting.
4. The setting order is: temperature buzzer ON/
OFF >> highest temperature limit >> lowest
temperature limit. If the UP or DOWN button is
held and presses continuously, the value will
change faster.
Note: The range for maximum upper limit is 70°C
and maximum limit for lower temperatures is -50°C.
16


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bresser 70-00001 TemeoTrend Sunny at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bresser 70-00001 TemeoTrend Sunny in the language / languages: English, German, French, Italian, Spanish as an attachment in your email.

The manual is 1,38 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info