632885

Bresser 70-00001 TemeoTrend Sunny Manual

14
Zoom out
Zoom in
Previous page
1/44
Next page
14
USING TABLE STAND OR WALL
MOUNTING
The main unit has a removable table stand, which
- when connected - can support the unit on a flat
surface. It is possible to remove the stand and
mount the unit on a wall using the recessed screw
hole. The same applies to the remote unit; it can be
placed on a flat surface or mounted on a wall using
the recessed screw hole.
OPERATION
Receiving measurements and time signal
Once batteries are placed in the remote unit, it will
start transmitting temperature readings at roughly 45
second intervals. As soon as batteries are installed
in the main unit it will start searching for a signal
from the remote sensor for about 3 minutes. Upon
successful reception of the signal, the outdoor
temperature will be displayed on the main unit. The
main unit will automatically update its readings at
about 45 second intervals.
Subsequently, the main unit will attempt to receive
the DCF77 radio signal. The reception symbol
flashes. When the time signal is received after 3-5
minutes, the current time and date appear in the
display. The reception symbol will now be shown
permanently in the display. Date and time are
automatically updated daily at 2:05 o’clock (CET) by
the main unit.
Temperature and humidity
1. Press the DOWN button to switch the displayed
temperature between °C and °F.
2. Once the battery is installed, the main unit
will start displaying the interior measurement
information. The main unit will display the
information from the remote sensor for the first
time approximately 3 minutes after the power
supply was established.
3. There are 3 different icons to displaying the
indoor climate as below:
humidity is same or lower than 40%
humidity is same or higher than 70%
humidity is higher than 40% but lower than 70%;
at same time, the temperature is higher than 20°C
(68°F), but lower than 27°C (80.6°F)
Max/Min records of temperature and humidity
1. Pressing and releasing the UP button in short
intervals repeatedly makes the display alternate
between the current temperature and humidity
as well as MIN/MAX recordings.
2. In MIN/MAX temperature display mode, hold UP
button to reset all indoor and outdoor MIN/MAX
records to current values.
4. The MIN/MAX temperature and humidity values
will be recorded automatically.
3. The MIN/MAX temperature and humidity records
automatically will be reset at 0:00 o’clock (12:00
a.m.) every day.
Current weather and weather trend
The weather forecast is depending on the
fluctuation of temperature and humidity. From
… 14 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bresser 70-00001 TemeoTrend Sunny at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bresser 70-00001 TemeoTrend Sunny in the language / languages: English, German, French, Italian, Spanish as an attachment in your email.

The manual is 1,38 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info