545966
12
Zoom out
Zoom in
Previous page
1/16
Next page
GB
ECopyright Bravilor Bonamat B.V.8
6. PROGRAMMING
READ!
Read the safety manual (700.403.347)
6.1 Programming buttons
1
2
3
6
5
4
Fig. 3 Signalling and display
1. Water level light
2. Reset button
3. Temperature set (up)
4. Temperature set (down)
5. Cooling run light
6. Display
6.1.1 Temperature setting function
The buttons Y and B are used for temperature setting.
1. Y : higher temperature
2. B : lower temperature
3. Keep Y B pressed together for more than 3 seconds: the temperaturesetting button will be
locked (this lock can be cancelled when repeating the procedure).
4. Temperature setting range: 5 20 _C.
TIP
If no button is pressed during programming for 5 seconds, the program ends automatically and the
set temperature reappearance in the display. The modified settings are stored in the system.
6.1.2 Filterreplacement / Cleaning setting and reset function
The device is equipped with an automatic reminding of filterreplacement/cleaning signaling and reset
function.
Setting function
1. Press the ”Reset” button for more than 3 seconds, the display will flash the time code.
2. Release the ”Reset” button.
3. Press Y or B to select your desired cycle time (it will be blinking).
4. Wait for more than 10 seconds.
5. Press ”Reset” button again to save.
C0: cancel automatic filterreplacement/cleaning function;
C1: 4 months replacement/cleaning cycle;
C2: 6 months replacement/cleaning cycle.
Signaling function
When the filterreplacement/cleaning time is up:
D The display will show the code and temperature alternately and
D the operation button light in front will flash.
Reset function
The signaling message won’t be lost until the filter is replaced and the counter is reset to zero.
You can press the ”Reset” button once to reset it.
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bravilor Bonamat Chiller at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bravilor Bonamat Chiller in the language / languages: English as an attachment in your email.

The manual is 0,24 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Bravilor Bonamat Chiller

Bravilor Bonamat Chiller User Manual - German - 16 pages

Bravilor Bonamat Chiller User Manual - Dutch - 16 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info