819681
5
Zoom out
Zoom in
Previous page
1/12
Next page
6 7
Insert nger with nail facing up into rubber nger clip.
It is recommended that you use the oximeter on your index
nger.
Make sure you nger is fully inserted into the device and not
pressed hard into a surface.
Press Power/Menu button on the top of the device.
Keep nger steady while taking a measurement.
Rotating the display
If you want to change the display direction, press
and release (approx. 1 second) the Power/Menu button on the
front panel. The display can be viewed in
6 dierent orientations.
PI%
0.0
---
Sp0
2
PR
bpm
%
-- ---
Sp02PR bpm
%
Care and cleaning
Use 70% alcohol to clean the pulse oximeter nger insert area
and your nger, before and after each test.
Parameter set up
Press the Power/Menu button to turn
on the device. With the device turned
on, press and hold the Power/Menu
button to change the display mode.
Press and hold the Power/Menu
button (approx. > 3seconds) until you
enter the parameter setup menu 1 and hold down again
(approx. 3 seconds) to enter screen 2.
1. In menu 1 or 2 press the Power/Menu button to cycle
through the various parameters. You will see the * move to
each parameter as you cycle through. When you are at the
parameter you wish to change, press the Power/Menu
button for 3 seconds to change the parameter setting.
2. If you wish to restore to factory settings, move the * to the
restore selection on menu 1 and hold the Power/Menu
button down for approximately 3 seconds.
3. To exit the menus and return to the measurement screen,
move the * to the exit selection on menu 1 or 2 and hold the
Power/Menu button for 3 seconds, or simply wait 10-12
seconds without interacting with device and it will return to
the measurement screen.
Attention
If using device outdoors or under strong light, please increase
the screen brightness to improve legibility.
Choose a lower screen brightness to conserve battery power.
70
%
-- ---
Sp0
2
PR
bpm
%
English
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Braun YK-81C - Pulse oximeter 1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Braun YK-81C - Pulse oximeter 1 in the language / languages: All languages as an attachment in your email.

The manual is 0.72 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info