Manual Braun mx 40 (page 4 of 6) (English)

400406

Zoom out

Zoom in

1/6

• Place the lid

over the containter, press down

firmly and lock in place with the safety lever

The motor can only be turned on if the attach-

ment has been locked properly.

• When using the pulsator setting (IL), work with

short intermittent bursts (approx. 1 sec.)

(see processing examples).

Processing examples

• What you should not

process:

extremely hard and juicy or liquid substances (for

instance: coffe beans, nutmeg, juicy fruits and

vegetables).

• For best results, do not fill the container with

quantities over the levels listed. The processing

times are dependent on the quality of the food,

the degree of fineness you want, etc.

• Before processing meat, be sure that all bones

have been removed first.

Disassembly

• Turn the motor off: Switch

set to «0».

• Unlock attachment: Safety lever

set to «O».

• Lift off the lid

and remove the container

together with the blade insert

. Then empty the

food into a bowl or other receptacle, carefully

holding blade in place by the plastic shaft.

Cleaning

The container

, blade insert

and lid

can be

washed in warm water with normal dishwashing

liquids. The container and the blade insert are also

suited for the dishwasher. The blades in this

appliance are very sharp and should be handled

with caution.

Subject to change without notice.

Product Capacity Preparation Setting

Bread (for breadcrumbs) 1 piece quartered IL

Hazelnuts 100 gr. whole (shelled) IL

Parsley 1 bundle picked apart, stems removedIL

Onions 1 quartered IL

Carrots (raw) 120 gr. pieces 3 cm in length IL

Radishes 100 gr. pieces 2 cm in length IL

Eggs (hard boiled) 2 whole IL

Beef (raw) 200 gr. 2 cm cubes II*)

Pork (raw) 200 gr. 2 cm cubes II*)

Gouda cheese (medium hard, without rind) 100 gr. 2 cm cubes I

Beef, potatoes, vegetables

(cooked) for baby food

150 gr. meat cut in 2 cm cubes II

Pork (raw) (for pie fillings) 150 gr. 2 cm cubes II

Meat stuffing (farce) 150 gr. II

*) We recommend using setting I to process smaller quantities (up to 100 gr.).

Liquidizer

Attachment

ZK 3

Caution

When removing and replacing the blade insert

only hold the plastic shaft intended for this purpose.

The blades are ver

y sharp! Do not touch them or

reach under them. The safety lock

(basic unit)

must not be opened before the blades come to a

rest. Do not use with very hot liquids (over 80°C).

Assembling

• Ensure that the basic unit is turned off (switch

set at «0».

• Place the liquidizer

on top of the basic unit

Make sure that it is securely located. Press the

blade insert

onto the shaft

, turning it slightly,

until the metal shaft top protrudes through the

plastic holding knob on the blade insert.

• Add the ingredients to be processed (see

«Applications»).

• Then place the safety cover

over the liquidizer,

insert the small inner cap

and lock the basic

unit.

The motor can only be turned on if the attach-

ment has been locked properly.

Applications

pacity: 1 liter maximum

Mixin

g: Liquids of all kinds

Puréein

g: Legumes, tomatoes, spinach and other

vegetables, apples, stoned fruit

Grindin

g: Grain, rice, legumes

Gratin

g: Potatoes, nuts, radish, bread for

breadcrumbs

Blendin

g: Butter, cottage cheese and yoghurt

dishes, milk-shakes, soups

To add in additional ingredients (when mixing

drinks or making apple sauce, for instance) remove

the small inner cap

and add to the mixture when

the unit is in operation.

Note

: Should the circulation of the food being

processed be blocked, switch on the pulsator

setting a few times consecutively.

The degree of fineness depends on the processing

time. Here are some examples:

Breadcrumbs: Break 2- 3 pieces of hard bread.

Process 3 times briefly with the pulsator setting IL,

then continue on setting I (total of 15 - 20 seconds).

Hazelnuts: 250 gr. of hazelnuts. Process on setting

II for approx. 5 seconds.

Apple sauce (hot, up to 80°C): Fill in cooked apples

up to a maximum of 1 liter. Process approx. 6

seconds on setting I or II.

Peanut butter: 250 gr. of shelled peanuts.

Process approx. 30 seconds on setting I or II.

Disassembly

• Turn the motor off: Switch

set to «0».

• Unlock attachment: Safety lever

set to «O».

Cleaning

All parts of the liquidizer can be cleaned with normal

dishwashing liquids and warm water (do not put into

the dishwasher). Occasionally, remove the seal

from the safety cover

for cleaning. Do not forget

to replace the seal before using the liquidizer again.

Subject to change without notice.

Blender Attachment

KX 4

Applications

pacity: 1 liter maximum

Mixin

g: Liquids of all kinds

Puréein

g: Legumes, tomatoes, spinach and other

vegetables, apples, stoned fruit

Grindin

g: Grain, rice, legumes

Gratin

g: Potatoes, nuts, radishes, bread for

breadcrumbs

Blendin

g: Butter, cottage cheese and yoghurt

dishes, milk-shakes, soups

Cho

pping: Soup vegetables, carrots, onions

Assembling

• Place the collar

on the basic unit

. Press

down firmly and lock with the safety lever

• Lay the sealing ring

on the rim of the blade part

and insert it through the collar

and onto the

of the basic unit.

• Then screw the glass jar

securely into the

collar

Caution

: Never switch the unit on before it is

completely assembled.

Using

Put the food to be processed into the glass jar

Place the lid

on the jar and loosel

y insert the cap

into the opening.

Turn the unit on:

Mixing drinks, coarse chopping: pulsator IL

Mayonnaise: setting I

Most other types of blending: setting II

how to replace Braun Multiquick System ZK 200 (Blender) coupling Submitted on 31-7-2021 at 00:22
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Braun mx 40 in the language / languages: English as an attachment in your email.

The manual is 0,28 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Braun mx 40 Manual

Product: