Manual Braun CareStyle 5 - IS 5042 (page 10 of 95) (All languages)

634913

Zoom out

Zoom in

1/95

Low Water

• When the water level is low, the icon is

permanently on.

• The icons / turn off

• If you want to continue steam ironing, refill the

tank of the steam station (A).

(B) Start ironing

• Place the iron on the iron rest (5) or on its heel

rest (15), plug in the appliance and press the on/

off switch on the station (2).

• After switch ON, the related icon in the display (1)

is permanently on.

• At the same time the icon

in the display (1)

will start to blink until steam is ready. This steam

setting is suitable for garments like cotton and

linen. Note: during the blinking in the display, the

steam function is deactivated.

• Once the conditions have been reached, the icon

will stay permanently on.

• The iron will start to heat up: During this, the

temperature control light on the iron (12) is

blinking.

• Thanks to the ultimate iCare technology, the

system has one temperature setting which is

perfectly suitable for all garments.

• Once the temperature setting is reached, the

temperature control light is permanently on.

• For steam ironing press the steam button (11)

below the iron handle. Steam will come out from

all the holes in the soleplate.

• For dry ironing just stop pressing the steam

button (11) or precision shot button(13). Take

care that after 10 minutes of dry ironing, the

appliance will turn into the stand-by mode.

• The unique round shape of the 3D eloxal

soleplate ensures best gliding results on difficult

parts (e. g. buttons, pockets and tough wrinkles).

• Double trigger: Press twice the steam button

(11). There will be a steam emission for a few

seconds. To stop this function, press the button

(11) again.

• Vertical steam: The iron can be used as well for

steaming hanging clothes (B).

Note:

When starting the ironing session or when you have

not used the steam function for some time, the

steam still present in the supply hose will condense

into water. This may cause some spluttering in the

appliance and a few drops of water may come out

from the soleplate.

ECO Function

• For ironing with lower steam press the ECO

button (3) and the icon turns permanently

on.

• Lower steam is suggested for most delicate

garments like silk, wool and synthetics.

• From 2nd switch on, the appliance works based

on the latest set function. To return to the normal

steam function press the ECO button again.

• Press the precision shot button (13) completely

down to activate it.

• Steam is coming out of the tip area of the iron

only.

• To stop this function just release the button (13).

• If you don‘t press it down completely, some

steam may also come out from the rear steam

holes in the soleplate.

(D) Stand-by

The system (steam iron and steam station) will turn

into the stand by mode to have a power

consumption reduction. When the system is going

into the stand-by mode, the icon is blinking.

It is activated:

• after 10 minutes without pressing the steam

button (11).

• after 10 minutes if the icon is activated, water

tank is not refilled and if there is no steam

emission.

To turn the system ON again, the ON/OFF button

(2) has to be pressed. Before start ironing again

wait until the temperature control light (12) has

turned continuously on.

After ironing

• Press the On/Off button to turn off the appliance

(2).

• Unplug and let the appliance cool down before

storing.

• Empty the water tank.

• For models with lock system, lock the iron.

DLB231668_5712811691_IS5042_5043_5044_UI_INT_AUNZ.indb 9 24.11.14 16:37

My Braun carestyl5 steam iron leaks water from the sole plate of the iron. It gushes out Submitted on 22-7-2021 at 15:48
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Braun CareStyle 5 - IS 5042 in the language / languages: All languages as an attachment in your email.

The manual is 9,38 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Braun CareStyle 5 - IS 5042 Manual

Product: