634913

Braun CareStyle 5 - IS 5042 Manual

12
Zoom out
Zoom in
Previous page
1/95
Next page
Trouble shooting guide
PROBLEM CAUSE REMEDY
The appliance does not switch on. The appliance is not plugged into a
mains socket.
Make sure the appliance is correctly
connected and press the on/off button.
Steam comes out under the steam
station
The “max” pressure safety system has
opened.
Turn the appliance off immediately and
contact an authorised Braun Customer
Services
There are some water drops from the
holes in the bottom of the sole plate.
Water has condensed inside the tubes
because steam is being used for the
first time, or has not been used for
some time.
Press the steam button several times
away from the ironing board. This will
eliminate cold water from the steam
circuit.
Brown coloured fluid leaks from the sole
plate.
Chemical water softeners or additives
have been poured into the water tank or
steam generator.
Never pour products into the water tank.
Clean the sole plate with a damp cloth.
The first time the appliance is
turned on, you notice smoke
Some parts have been treated with
sealer/lubricant which evaporates the
first time the iron heats up.
This is normal and will stop when you
have used the iron a few times.
The appliance emits an intermittent
noise associated with vibrations.
Water is being pumped into the steam
generator.
This is completely normal
The appliance emits a continuous
noise associated with vibrations.
Unplug the system from the mains and
contact an authorised Braun Customer
Services.
The steam generator cap is difficult to
unscrew
Limescale has made the steam
generator cap difficult to open
Turn the cap forcefully. To avoid the
problem, rinse the steam generator
frequently
After topping up with water, the light
does not reset.
The water float doesn’t work
appropriately
Empty the water tank, rinse out it and
refill.
All LEDs are blinking System error Unplug the system, plug it again and
press ON/off button. If this problem is
still present, Turn the appliance off
immediately and contact an authorised
Braun Customer Services.
The icons
and are blinking
Accidentally the reset button was
pressed instead of ON/OFF button.
Unplug and plug again
Subject to change without notice. Please do
not dispose the product in the household
waste at the end of its useful life. Disposal
can take place at a Braun Service Centre or
at appropriate collection points provided in your
country
11
DLB231668_5712811691_IS5042_5043_5044_UI_INT_AUNZ.indb 11 24.11.14 16:37
… 12 …


Need help? Post your question in this forum.

Forumrules
1

Forum

braun-carestyle-5---is-5042

Reset search

  • My Braun carestyl5 steam iron leaks water from the sole plate of the iron. It gushes out Submitted on 22-7-2021 at 15:48

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Braun CareStyle 5 - IS 5042 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Braun CareStyle 5 - IS 5042 in the language / languages: All languages as an attachment in your email.

The manual is 9,38 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info