Manual Braun 5691 flex xp system (page 10 of 53) (English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish)

369688

Zoom out

Zoom in

1/53

from the cartridge. Slide the cartridge into

the base as far as it will go.

• Slowly close the housing by pushing it down

until it locks.

Replacing the cartridge

After having pressed the lift button to open the

housing, wait for a few seconds before

removing the used cartridge.

Before discarding the used cartridge, make

sure to close the openings using the lid of the

new cartridge, since the used cartridge will

contain contaminated cleaning solution.

The used cartridge can be disposed in the

household waste.

Operating your

Clean&Charge

• Connect your Clean&Charge with the

special cord set to the mains electricity

supply. The special socket at the back is

adjustable to save space. After each shave,

switch the shaver off and put it into the

Clean&Charge, upside down and with the

front showing.

• Push the start/release button (3) to lock and

connect the shaver. The cleaning process

will start (approx. 5 minutes cleaning,

4 hours drying).

• Do not interrupt the cleaning process, as it

leaves the shaver wet and not fit for use. If

interruption is needed nonetheless, press

the start/release button (3).

• After 4 hours the process is finished and the

shaver is ready for use.

To release it, push the start/release button.

•A cleaning cartridge should be sufficient

for about 30 cleaning cycles. When the level

indicator (4) has reached the «min» mark,

the remaining fluid in the cartridge is suffi-

cient for about 5 more cleaning cycles. Then

the cartridge should be replaced, when

used daily approx. every 4 weeks.

• The hygienic cleaning solution cartridge

contains alcohol which, once opened,

will naturally evaporate slowly into the

surrounding air. Each cartridge, if not used

daily should be replaced after approx.

8 weeks.

• Clean the housing from time to time with a

damp cloth, especially the opening where

the shaver rests.

Subject to change without notice.

This product conforms to the

EMC-Directive 89/336/EEC and to the

Low Voltage Regulation (73/23 EEC).

Electric specifications see printing on the

special cord set.

5722459_5691_MN Seite 11 Mittwoch, 18. August 2004 2:54 14

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Braun 5691 flex xp system in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 1,27 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Braun 5691 flex xp system Manual

Product: