Manual Braun 5691 flex xp system (page 9 of 53) (English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish)

369688

Zoom out

Zoom in

1/53

Replacing the shaving parts

To maintain 100% shaving performance,

replace your foil and cutter block every 18

months or when worn. Change both parts at

the same time for a closer shave with less skin

irritation.

(Shaver foil and cutter block:

part no. 5000/6000)

Preserving the batteries

In order to maintain the optimum capacity of

the rechargeable batteries, the shaver has to

be fully discharged (through normal use) every

6 months approximately. Then recharge the

shaver to full capacity. Do not expose the

shaver to temperatures higher than 50 °C for

extended periods of time.

Environmental notice

This appliance is provided with nickel-

cadmium rechargeable batteries. To protect

the environment, do not dispose of the appli-

ance in the household waste at the end of its

useful life. Open the housing as shown on page

45, remove and dispose of the batteries at your

retail store or at appropriate collection sites

according to national or local regulations.

B Clean&Charge

Braun Clean&Charge has been developed for

cleaning, charging and storing your shaver.

Clean your shaver daily in the Clean&Charge.

During the automated cleaning process, the

shaver is switched on and off at intervals to

obtain best cleaning results. Since the spe-

cially formulated cleaning fluid contains a

small amount of oil, the cleaning procedure

also fulfills the lubrication needs of the shaver.

Important

• Only use the special cord set supplied with

the shaver.

• In order to avoid any leakage of the cleaning

fluid, place the appliance on a flat, stable

surface. Do not tip, move suddenly or trans-

port in any way if a cleaning cartridge is

installed.

• Do not place the appliance in a mirror cabi-

net, nor store it over radiators, nor place it

on polished or laquered surfaces. Do not

expose to direct sunlight.

• The appliance contains highly flamma-

ble liquid. Keep it away from sources

of ignition. No smoking. Keep out of reach

of children. Do not refill cartridge. Use only

original Braun refill cartridge.

• When cleaning the shaver, its protection

cap should be removed.

Description

1 Lift button for cartridge exchange

2 Contact bow

3 Start/release button

4 Level indicator

5 Cleaning cartridge

Before using Clean&Charge

Installing the cartridge

• Press the lift button (1) to open the housing.

• Hold the cartridge down on a flat, stable

surface (e.g. table). Carefully remove the lid

5722459_5691_MN Seite 10 Mittwoch, 18. August 2004 2:54 14

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Braun 5691 flex xp system in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 1,27 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Braun 5691 flex xp system Manual

Product: