638923
8
Zoom out
Zoom in
Previous page
1/16
Next page
Open the freezer compartment door a little way.
Using a small screwdriver, press the spring in the open-
ing of the lower door bearing slightly upwards and take
the door bearing out complete with the door.
Position the covering cap (M) on the opposite side.
Turn the freezer compartment door through 180° and fit
the lower door bearing into the lower bearing cavity of
the freezer compartment door.
Lift the freezer compartment door a little way upwards,
fit it into the upper door bearing, and at the same time
insert the lower door bearing into the square hole. Small
upwards and downwards adjustments of the freezer
compartment door will make fitting easier.
54
Changing over the freezer compartment door
M
Prior to Initial Start–Up
Please clean the appliance interior and all accessories prior to initial start-up (see section: “Cleaning and
Care”).
Electrical Connection
The plug socket necessary for connection of your appliance to the electricity supply should be positioned
so that it is possible to pull out the appliance plug.
If your appliance is installed under a continuous work-
top, the plug socket should be provided as shown.
Alternatively a concealed spur socket fitted with a 13 A
fuse may be fitted.
If the socket is not accessible once the appliance is built
in, the electrical installation must include suitable means
of isolating the appliance from the mains (e.g. fuse, cut-
out, current trip or similar with a minimum contact sep-
aration of 3 mm).
130
300
AEG44
Before initial start-up, refer to the appliance serial plate to ascertain if supply voltage and current values
correspond with those of the mains at the installation location.
e.g.: AC 220 ... 240 V 50 Hz or
220 ... 240 V ~50 Hz
(i.e. 220 to 240 volts alternating current, 50 Hertz).
The rating plate is inside the appliance on the left.
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Brandt TTA150WE at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Brandt TTA150WE in the language / languages: English as an attachment in your email.

The manual is 0,14 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Brandt TTA150WE

Brandt TTA150WE User Manual - German - 17 pages

Brandt TTA150WE User Manual - Dutch - 16 pages

Brandt TTA150WE User Manual - French - 16 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info