336234

Brandt te 612 xs1 Manual

43
Zoom out
Zoom in
Previous page
1/48
Next page
43
Looking after
sparkers and
injectors
Looking after
the electric
hotplate
- If ever the sparkers
get dirty, clean them
with a stiff non-
metallic brush.
- The gas injectors are
in the centre of each
burner in the form of
a "pot". Make sure not
to block them up
partially when
cleaning the hob, as this will considerably
reduce the performance of your gas-rings.
- Small hard-bristled
brush.
- Safety pin
- The electric hotplate is protected by a black
surface coating. Therefore, avoid using any
abrasive products. After use, wipe it clean
with an oily cloth.
- If ever a electric hotplate starts to rust,
remove the rust with (with emery paper or
similar) and re-coat the electric hotplate with
a high-temperature renovating product to be
found at your local distributor.
- Renovating product
available in the shops.
Looking after
the grills and
burners
- Use a non-abrasive cream for removing any
persistent stains. Then rinse with clean
water. Dry each burner element carefully
before re-lighting your hob.
- Non-abrasive cream.
- Household sponge.
Looking after
enamel or
stainless steel.
- Use polishing cream for cleaning the enamel
on the hob. Polish with a dry clean cloth.
- Never allow any acid liquids such as lemon
juice, vinegar, etc. to remain in contact with the
enamel.
- Use a sponge and soapy water or a standard
stainless steel cleaner for cleaning the stainless
steel parts on your hob.
- Soft polishing
cream.
- Standard stainless
steel cleaning
product
HOW TO PROCEED
ACCESSORIES TO
BE USED
Keeping your hob in good condition is easy if you clean it before it is completely
cold. Even so, never clean it when it is in use. Put all the electric and gas control
knobs at zero.
How to look after your hob?
- It is better to clean the elements of your hob by hand, do not put any parts
in the dishwasher.
- Never use scouring pads for cleaning your hob.
- Do not use a steam cleaner.
thermocouple
Nut
Injector
Sparker
99628882_A_ML.qxp 18/07/2006 15:21 Page 43
… 43 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Brandt te 612 xs1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Brandt te 612 xs1 in the language / languages: English, French as an attachment in your email.

The manual is 0,63 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info