56
4 / USING YOUR APPLIANCEEN
USING THE PROGRAMMER
•
•
How to set the time
- When supplied with electricity.
The display flashes at 12:00 (fig.1).
Set the time by pressing the + or - touch con-
trols (holding your finger on the touch control
allows you to scroll through the numbers rap-
idly) (fig.2).
Example: 12:30.
Press the “ ” touch control to validate.
The display stops flashing.
- To set the time on the clock
The function selector switch must be in the 0
position (fig.1).
Press and hold the “ ” touch control for a
few seconds until the display is flashing
(fig.2), then release. Audible beeps indicate
that it is now possible to set the time.
Adjust the clock setting with the + and -
touch controls (fig.3).
Press the “ ” touch control to validate
(fig.4).
fig.1
fig.2
fig.2
fig.3
fig.4
fig.1
Warning
If the “ ” touch control is not
pressed in order to validate, the time is
recorded automatically after a few seconds.
