Manual Brandt AD875XE1 (page 23 of 64) (English, German, Danish, French)

487384

Zoom out

Zoom in

1/64

- The appliance must be unplugged during installation or when any repairs or maintenance work is

being performed.

- Ensure that the network voltage corresponds to the voltage noted on the identification plate located

inside the hood.

- If the electrical installation at your residence requires any changes in order to hook up your

Appliance, call upon a professional electrician.

- If the hood is being used in evacuation mode, do not connect the appliance to a combustion gas

exhaust duct (boiler, chimney, etc.) or to a CMV (controlled mechanical ventilation) system.

- Under no circumstances should the exhaust duct empty into the attic.

- Install the hood at safe distance of at least 65 cm from an cooking hob.

This appliance can be installed in either duction version or filtering version.

The appliance is supplied in the filtering version, the charcoal filter is installed (Ref.AK775AE1).

• USING THE DUCTING MODE

If you posses an outlet to the exterior

(fig. 1)

Your hood can be connected to this outlet using a

flue (minimum Ø 125mm that is enamelled, in

aluminium, flexible or made of inflammable

material). CAUTION! For installation reasons the

flue must absolutely be flexible.

Your cooker hood is a filtering version. All you

need to do is to remove the charcoal filters first.

• USING THE FILTERING MODE

If you do not posses an oulet to the exterior

(fig. 2)

All of our appliances can be used in recycling

mode.

The air and steam taken up by the unit are

purified with charcoal filters and returned to the

environment through the aeration grids on the

side of the telescopic flue.

2 / INSTALLING YOUR APPLIANCE

fig. 1

fig. 2

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Brandt AD875XE1 in the language / languages: English, German, Danish, French as an attachment in your email.

The manual is 1,92 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Brandt AD875XE1 Manual

Product: