Manual Brandt AD1078X (page 26 of 49) (English, French, Spanish)

487411

Zoom out

Zoom in

1/49

2 / INSTALLING YOUR APPLIANCE

ASSEMBLING THE VENTILATION

SHAFT

••

Outdoor evacuation

- Calculate the final height for fixing the duct sup-

port U-bracket (part B Pic. 1)

- Mark the two holes accordingly

- Drill 8 mm diameter holes and secure the duct

support bracket, ensuring that it is fixed on the

same axis as the hood (oart B Pic 1)

- Fix the flat bracket behind the lower duct. (part

C Pic. 4)

- Place the glass on the guides. Slide the glass in

and secure it with the 4 screws with rubber seal

(glass safety). Tighten the screws slightly

--Fix the two ducts to the hood.

- Connect the sleeve to the air outlet to the out-

side.

- Make the electrical connection to the hood

using the mains supply cable.

- Lift the upper duct up to the ceiling and fix it to

the bracket using the screws.

••

Fig.3

Fig.4

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Brandt AD1078X in the language / languages: English, French, Spanish as an attachment in your email.

The manual is 1,42 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Brandt AD1078X Manual

Product: