Manual Brandt AD1078X (page 25 of 49) (English, French, Spanish)

487411

Zoom out

Zoom in

1/49

2 / INSTALLING YOUR APPLIANCE

ASSEMBLING THE HOOD

Warning

The hood must be installed in compli-

ance with all applicable regulations concern-

ing the ventilation of premises. In France

these regulations are described in DTU 61.1

from the CSTB. In particular, the evacuated air

should never be conveyed to a duct used to

evacuate smoke from appliances that use gas

or other combustible fuels. Unused ducts may

only be used after approval from a competent

specialist.

The minimum distance between the cooking

surface and the lowest part of the hood must

be 70 cm at least. If the instructions for the hob

installed under the hood specify a distance of

more than 70 cm, this requirement must be

respected.

ixing to the wall :

-Mark a vertical line on the wall centred on the

cooktop.

-Mark on the wall the three holes that have to be

drilled, using the supplied hood suspension

hook and observing the recommended dis-

tance (part A Pic. 1).

-Drill the three 8 mm diameter holes in a suit-

able position and insert the plugs (part A Pic 1).

-Secure the hood’s fixing support, ensuring

that it is perfectly level (part A Pic 1).

- Before fixing the hood, mount the non-return

valve on the motor outlet

-Fix the extendable evacuation sleeve (not

included) to the motor outlet without impeding

the movement of the non-return valve.

-Fit and secure the body of the hood on this

support with the screws provided for this pur-

pose.

••

Fig. 1

Gaine extensible (non fourni)

Fig. 2

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Brandt AD1078X in the language / languages: English, French, Spanish as an attachment in your email.

The manual is 1,42 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Brandt AD1078X Manual

Product: