Manual Brandson 302601 (page 19 of 60) (English, German, French, Italian, Spanish)

714519

Zoom out

Zoom in

1/60

19English

Note: It is recommended to test the carbon monoxide detector once a month to

ensure that the device is working properly.

8.3 Lock alarm

Heavy vapours or the like can also trigger an alarm. When the alarm signal sounds,

by pressing the "test / hush" buon, the device can be muted for approximately 2

minutes. In this period, the green and the red LEDs blink every 10 seconds and a

beep sounds. The detector will not react any more during these 2 minutes. If the

CO concentraon is sll in the danger zone aer the two minutes have passed,

then the alarm sounds again. If the concentraon sinks to a safe range, then the

device stops the alarm.

8.4 Unlock alarm

To unlock the alarm again, press the "test / hush" buon. The carbon monoxide

detector subsequently will funcon normally again, indicated by the green LED

blinking every 50 seconds and the display showing the current PPM value.

8.5 Saving funcon

If the device detects an increased CO value and the alarm sounds, but nobody

is at home, the device stops the alarm as soon as the value is back within the

normal range. The highest measured CO concentraon is now displayed on the

display every 15 seconds, the device beeps twice and the red LED blinks. Press the

"test / hush" key for deleng the stored maximum value. The device subsequently

returns to the normal operang mode.

8.6 Low baery

The carbon monoxide detector recognises when the baery voltage is too low

and the baeries should be exchanged. The red LED blinks every 40 seconds and

an alert beep sounds. A baery symbol is displayed on the display. While the

baery status is low, the device sll funcons faultlessly but the baeries of the

carbon monoxide detector must be exchanged without delay.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Brandson 302601 in the language / languages: English, German, French, Italian, Spanish as an attachment in your email.

The manual is 0,73 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Brandson 302601 Manual

Product: