Place the machine on a clean, hard, level surface, free from unwanted material or other objects that may hamper your ability to move freely. A
rubber mat can be used below the machine to prevent the release of static electricity and protect your ooring.
The machine can be moved by one or more persons. Make sure that your own physical strength is capable of safely moving the machine.
2. Adjust the intensity settings on the Hydraulic Cylinders.
Note: Initially, the settings on each cylinder should match. Begin with each cylinder set to the central, white dot on the dial.
3. Examine below the Treadles for any objects. Be sure it is clear below the machine.
4. Connect the power cord to the machine and into a grounded AC Wall Outlet.
Put the power cord alongside the machine, out of your way when you dismount the machine. Avoid stepping on the power cord and plug.
Note: The TreadClimber
®
fitness machine is designed to plug directly into a properly wired and grounded three prong 120V outlet. If an exten-
sion cord must be used, be sure it is a heavy duty model, rated for 15A.
5. If you use the Heart Rate Monitor, follow the Remote Heart Rate Monitor directions.
6. Switch on the power. Power is now supplied to the motor and Console.
7. Straddle the belts and stand on the Side Foot Support Platforms. Put the Safety Key into the Safety Keyhole and clip the Safety Key cord to your
clothing.
• Examine the Safety Key and be sure it is connected to the Console correctly.
• Always attach the Safety Key Clip to your clothing during workouts.
• If there is an emergency, pull out the Safety Key to shut off the power to the Belt Motor. This will quickly stop the belts (brace yourself- this is an
abrupt stop).
8. Select your workout, push START, and begin your workout when the belts are up to speed.
The belts will only move after a 3 second, audible beep countdown.
Keep your hands on the support Handlebars and stay as near the front of the machine as is comfortable in order to stay in balance on the Treadles.
Keep your foot in the center of each Treadle, do not let your feet cross in front of your body as you increase the speed.
When you are experienced and comfortable with the action of the machine, you may wish to allow your arms to swing freely in a natural walking mo-
tion. This workout will activate your core muscles. It should only be done by those comfortable with not holding on to the Handlebars.
Power Up / Idle Mode
The TreadClimber
®
machine will enter Power Up / Idle Mode when power is supplied, the power switch is ON, and the START button is pushed.
The belts will only move after a 3 second, audible beep countdown.
Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.
Product:
Forumrules
To achieve meaningful questions, we apply the following rules:
First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.
Register
Register getting emails for Bowflex TC20 at:
new questions and answers
new manuals
You will receive an email to register for one or both of the options.
Get your user manual by e-mail
Enter your email address to receive the manual of Bowflex TC20 in the language / languages: English as an attachment in your email.
The manual is 12,08 mb in size.
You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.
The manual is sent by email. Check your email
If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.
The email address you have provided is not correct.
Please check the email address and correct it.
Your question is posted on this page
Would you like to receive an email when new answers and questions are posted? Please enter your email address.
