737224
37
Zoom out
Zoom in
Previous page
1/52
Next page
Assembly / Owner’s Manual
37
Pausing or Stopping a Workout
1. With a rm hold on the Handlebars, step off of the belts and onto the Side Foot Support Platforms on either side of the Treadles.
2. Push STOP to pause the workout. The belts will slow to a complete stop.
Note: If a paused workout is not restarted in 5 minutes, the machine will shut down and clear all workout values.
3. To restart your workout, push the START button. To end your workout, push STOP again. The Console will display your results.
To prevent unsupervised operation of the machine always remove the Safety Key and disconnect the power cord from the wall outlet and
machine AC input. Place the power cord in a secure location.
Console Service / Setup Mode
The Console has a Service / Setup Mode. Some options in the Service / Setup Mode can be adjusted to your preferences, but most are helpful for
service of the machine. To access the Service / Setup Mode, hold down the Increase and Decrease buttons for 2 seconds.
Order Display Option Description
1 Unit Units Select your preferred unit of measurement; “Lb” = English Imperial, “Si” = metric
2 brt Brightness Control the contrast level of the Console; “8” = maximum intensity, “1” = minimum
3 LOG Error Log * Displays error codes, starting with the most recent
4 Con Console Version * Displays the software version
5 dr Drive Version * Displays the drive version
6 HrS Device Usage Displays total number of hours and minutes used
7 diSt Device Mileage Displays total mileage
8 HiSt Motor Current History * Displays the average motor current for the current maintenance interval. Push the Decrease
button to view the averages of previous intervals.
9 Hd Hardware Type * Displays the hardware type
10 Curr Motor Current * Displays the current of the motor
11 CoAS Coast Time * A test to see how long until the belts stop.
12 LooP Loop Back * A test to see if the Console is receiving data.
13 CSn Console Serial Number Displays the serial number of the Console across all the displays
14 dSn Drive Serial Number * Displays the serial number of the Motor Control Board across all the displays
15 dES Drive Error Statistics * Displays the latest hard error statistics for the Motor Control Board. Push the Increase and
Decrease buttons to view all error statistics.
* for Service Technicians
Use the Increase and Decrease buttons to cycle through the Options. To change the value of an Option, push START and use the Increase and
Decrease buttons to select the desired value. Push START to assign the new value to the Option.
Push STOP to exit an Option and the Service / Setup Mode.
37


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bowflex TC10 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bowflex TC10 in the language / languages: English as an attachment in your email.

The manual is 11,89 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info