Manual Bowers Wilkins Panorama 2 (page 6 of 113) (English, German, Dutch, French, Italian, Polish, Portuguese, Swedish, Spanish, Norwegian)

562446

Zoom out

Zoom in

1/113

ENGLISH

3.2 Remote Handset

Before the remote handset is rst used the clear

plastic insulating tab that prevents its battery from

draining must be removed. Follow the procedure

illustrated in Figure 7 and described below to remove

the insulating tab.

• Rotate the battery cover anticlockwise 1/8 full

turn and remove it.

• Release the battery by pressing down on the

edge opposite the metal spring.

• Remove and discard the insulator.

• Replace the battery, rst locating one side under

the small lugs opposite the metal spring.

• Replace the cover.

Figure 8 illustrates the Panorama 2 handset controls.

Note: Universal or “learning” remote handsets

may also be used to control Panorama 2. If

Panorama 2 remote control codes are required

for handset programming they can be found

in the Support section of the Bowers & Wilkins

web site at www.bowers-wilkins.com

Note: An HDMI based remote control sharing

technology called CEC (Consumer Electronics

Control) may, if implemented on your television,

enable the television remote control handset

automatically to control some Panorama 2

functions. The manufacturer of your television

may use an alternative proprietary name for CEC.

3.3 Switching On and Using Panorama 2

Ensure that the DVD player is connected to

Panorama 2 Input 1 and that a television is

connected via its ARC input to the Panorama 2

HDMI Out. Switch on both the DVD player and

television, play a disc on the DVD player and select

the appropriate television input.

In its default setup Panorama 2 will switch on

automatically when an input signal is present on

Input 1. It will also automatically select Input 1

together with a default group of setup parameters

that have been specically chosen to provide good

initial performance in a typical domestic environment.

If a signal is present on Input 1 Panorama 2 will

immediately reproduce it.

Once reproducing audio satisfactorily, use the

Panorama 2 handset or front panel controls to raise

or lower the volume, select inputs or any available

alternative decode modes.

3.4 Audio Decode Modes

Audio from DVD, games consoles, streaming and

broadcast sources is often encoded with a variety

of surround sound formats. Panorama 2 is capable

of decoding Dolby Digital, DTS, Dolby PLII surround

sound formats as well as providing virtual surround

and music optimised modes. However, not all

decode modes can be used with every Panorama 2

input or type of programme material.

Panorama 2 will detect Dolby Digital and DTS

encoded 5.1 programme material and automatically

select the appropriate decode mode. With stereo

programme (2.0) material (analogue or digital),

Panorama 2 provides a choice of Cinema or Music

decode modes. Cinema mode encompasses

either Dolby PLII decoding with appropriately

encoded programme material, or “virtual surround”

processing that creates a surround sound eld from

non-encoded material. Music mode comprises

an algorithm that reproduces stereo material with

Figure 7

Removing the insulating tab from the remote

Figure 8

Handset controls

1 2 3 4 5

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Bowers Wilkins Panorama 2 in the language / languages: English, German, Dutch, French, Italian, Polish, Portuguese, Swedish, Spanish, Norwegian as an attachment in your email.

The manual is 14,12 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Bowers Wilkins Panorama 2 Manual

Product: