562446
5
Zoom out
Zoom in
Previous page
1/113
Next page
5
ENGLISH
With this connection scheme the majority of audio
programme formats can be reproduced through
selection of the appropriate Panorama 2 input.
Note: For further information on connecting
Panorama 2 to a wide variety of audio sources
a Panorama 2 Connection Guide is available
for download from the Bowers & Wilkins web site
at www.bowers-wilkins.com
In addition to the mains, HDMI and subwoofer
sockets, a service socket is also present on the
Panorama 2 connection panel. The service socket is
not intended for consumer use. Figures 5 illustrates
and identies all the Panorama 2 connection
sockets.
2.3 Panorama 2 Subwoofer Connection
An active subwoofer can be connected to Panorama
2. A subwoofer can enhance the Panorama 2
experience by providing extra impact on movie
soundtracks and extending bass response on stereo
music programmes.
The subwoofer is connected via the Panorama 2
subwoofer output socket. Connect one end of an
RCA phono cable to the socket and the other end of
the cable to the subwoofers input socket.
Ensure that the subwoofer is switched on. As
Panorama 2 handles the appropriate low-pass
ltering on its subwoofer output, the subwoofer’s
internal low passlter should be set to its maximum
or switched off. Initially set the subwoofer’s volume
level control to between half and three-quarters
maximum thenne control its volume via the
Panorama 2 subwoofer level setup menu (See
Paragraph 4.1).
3. Using Panorama 2
Panorama 2 is simple to operate with commonly
used functions available on both its front panel
and remote control handset. It has two operational
modes: Normal Mode and Setup Mode. When
Panorama 2 is switched on from standby it will start
up in normal mode.
Setup Mode, which requires the Panorama 2 to be
connected using HDMI to a television input for on
screen display, is selected via the remote handset
OSD button. Panorama 2 front panel controls are
described in Section 3.1, the remote handset is
described in Section 3.2, and Panorama 2 setup is
described in Section 4.
3.1 Panorama 2 Front Panel Controls
The Panorama 2 front panel display incorporates
a standby button and indicator with a proximity
and touch sensitive screen. When Panorama 2
is switched on, the display screen is operational
only when it senses an operator’s hand nearby.
Furthermore, the display only makes available
the options inherent to the specic Panorama 2
installation. For example, if only two out of the four
Panorama 2 inputs are connected, the display will
make only those two inputs available for selection.
Figure 6 illustrates the Panorama 2 front panel
controls.
Standby
Figure 6
Front panel controls
Figure 5
Panorama 2 connection sockets
HDMI out
optical/aux sub out
®
HDMI 1 HDMI 2 HDMI 3
service
Audio Mode
VolumeInput
Indicator
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bowers Wilkins Panorama 2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bowers Wilkins Panorama 2 in the language / languages: English, German, Dutch, French, Italian, Polish, Portuguese, Swedish, Spanish, Norwegian as an attachment in your email.

The manual is 14,12 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info