548963
4
Zoom out
Zoom in
Previous page
1/61
Next page
4
ENGLISH
The two MM-1 speaker units are intended to be desk
mounted, one either side of a computer monitor. The
powered speaker should be on the right side of the
monitor and the slave speaker on the left hand side.
Do not position the speakers too far apart if your
are sitting close to the monitor. The triangle formed
by the two speakers and the listener’s head should
be approximately equilateral. The MM-1 speaker
positioning is illustrated above.
3. Positioning MM-1
The MM-1 can be operated either from the controls on
the sides of the powered speaker or from the remote
control handset (illustration top). If the remote handset
is to be used, its battery-insulating tab must rst be
removed. This is illustrated above.
MM-1 can be switched on from standby (indicator: red)
by the following actions:
Pressing the standby button on the left hand side of
the powered speaker.
• Pressing the handset standby key.
When switched on, the MM-1 indicator will illuminate
blue.
Note: The table on page 5 describes all the MM-1
indicator colours and their meanings.
With the MM-1 switched on from standby and
connected to a PC/Mac via USB, the computer will
identify the MM-1 as an output only audio device.
Specifying MM-1 in the PC/Mac audio control panel
will allow it to play audio data either stored locally on
the computer or streamed via a network or the internet.
Depending on the PC/Mac audio application in use,
the handset may be used to control playback, skip
tracks and adjust volume.
You can use the volume buttons on the right hand
side of the powered speaker, or the handset volume
keys, to adjust the volume.
You can listen to analogue audio via the MM-1
aux input. The analogue input audio will be heard
simultaneously with any USB audio.
You can listen to headphones by plugging them in
to the headphone socket on the back of the powered
speaker. The MM-1 speakers will mute when a
headphone plug is inserted in the socket.
You can mute the MM-1 speakers by pressing the
handset mute key or pressing the standby button on
the left hand side of the powered speaker.
To return the MM-1 to standby mode press the
handset standby key or press and hold the standby
button on the left hand side of the powered speaker.
4. Using MM-1
L R
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bowers Wilkins MM-1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bowers Wilkins MM-1 in the language / languages: English, German, Dutch, French, Polish, Portuguese, Swedish, Spanish, Norwegian as an attachment in your email.

The manual is 2,66 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info