548963
3
Zoom out
Zoom in
Previous page
1/61
Next page
3
ENGLISH
www.bowers-wilkins.com
2. Connecting To Your MM-11. MM-1 Carton Contents
MM-1 connection sockets are found on the back
and the underside of the powered speaker. Those on
the underside are the power input socket, the USB
socket and the slave speaker socket. Those on the
back are the line input socket and the headphone
output socket. The connection sockets are illustrated
above.
Connecting the Slave Speaker
The slave speaker incorporates a captive cable that
connects to the slave speaker connection socket
on the underside of the powered speaker. The plug
on the end of the captive cable is a push t into the
slave speaker socket. The slave speaker incorporates
a facility in its base to coil any spare cable. See
illustration above right for coiling spare cable.
USB Connections
If you wish to listen to audio either stored or streamed
on your PC/Mac, connect from a spare USB socket on
the computer to the USB socket on the underside of
the powered speaker. Use the USB cable supplied.
Note: If an alternative USB cable is used it should
be no longer than 3m (10 ft).
MM-1 Powered Speaker
MM-1 Slave Speaker
Power Supply
Power Cable
USB Cable
Stereo Mini-jack cable
Remote Control Handset
Document pack containing a Quick Start Guide,
warranty information and statutory safety warnings.
Environmental Information
All Bowers & Wilkins products are
designed to comply with international
directives on the Restriction of Hazardous
Substances (RoHS) in electrical and electronic
equipment and the disposal of Waste Electrical
and Electronic Equipment (WEEE). These symbols
indicate compliance and that the products must be
appropriately recycled or processed in accordance
with these directives. Consult your local waste disposal
authority for guidance.
Power supply manufacturer: EG BILLION
Power supply type: PAT051A16EU
Power supply input: 100-240 V~, 50/60 Hz, 1,5 A,
Class II, IP X0
Power supply output: DC 16 V, 3,2A
Aux Input
If you wish to listen to an alternative analogue audio
source, TV audio or your PC/Mac analogue audio
output for example, connect it to the MM-1 aux in
socket on the back of the powered speaker using the
mini-jack cable supplied.
The MM-1 aux in socket and USB input operate in
parallel so that audio signals present on either will
be heard simultaneously. This allows, for example,
computer alert sounds to be heard via the USB input
even while audio is playing from an alternative analogue
source through the aux input.
Connecting the Power Supply
Connect the MM-1 Power Supply to a mains outlet
socket using the supplied mains cable. Now connect
the Power Supply output cable to the MM-1 power
input socket. When rst connected to mains power the
MM-1 will automatically enter standby mode with its
indicator illuminating red.
Note: The table on page 5 describes all the MM-1
indicator colours and their meanings.
Headphones
A stereo mini-jack headphone socket is tted to the
back of the powered speaker. Insertion of a headphone
plug will mute the MM-1 speakers.
SLAVE SPEAKER
R
1
1
1
1
1
Contents
ENGLISH 2
1. MM-1 Carton Contents
3
2. Connecting To Your MM-1
3
3. Positioning MM-1 4
4. Using MM-1 4
5. MM-1 Firmware Update
5
3


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bowers Wilkins MM-1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bowers Wilkins MM-1 in the language / languages: English, German, Dutch, French, Polish, Portuguese, Swedish, Spanish, Norwegian as an attachment in your email.

The manual is 2,66 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info