582033

Boston Boston M 250 Manual

6
Zoom out
Zoom in
Previous page
1/14
Next page
6
Front Left and Right Speakers
For optimal results, it is advisable to start with the front left and right speakers positioned 6-12 feet (2-4m) apart from each other,
at least 3 inches (76mm) away from the wall or curtains behind them, and at least 2 feet (0.6m) away from the corners of the room.
Putting the front left and right speakers too close to a wall or corner can produce an unnatural bass reinforcement and side wall
reflections that can detract from the speakers balanced, uncolored sound. If your listening position happens to be less than the
distance the speakers are apart, then you may prefer to aim the front of the speakers’ inward toward the primary listening
position (“toe-in”). Experimentation is key to finding the best front left and right speaker positions. Playing a piece of stereo music
that you are very familiar with and has a large range of frequencies is often the simplest way to find the best speaker locations for
your room and listening preferences.
Center Speaker
For optimal results, it is advisable to place the center speaker directly below, behind (perforated screens only) or above the
center of the screen. The BMR driver has extremely wide dispersion characteristics so it is not necessary to “aim” the center
speaker baffle towards the listening position. If placed on a shelf or cabinet, position the speaker so the front of it is flush with
the edge of the shelf or cabinet. This will avoid sound reflections that detract from the balanced, uncolored sound.
Surround Speakers
For optimal results, it is advisable to position the surround speakers directly to the side of the listening position, above ear
level and at least 2 feet (0.6m) away from the corners of the room. If the speakers are mounted more than 3 inches (76mm)
from the ceiling, it is advisable to position the speaker so the two ports are aimed towards the ceiling. If the speaker is
mounted within 3 inches (76mm) of the ceiling, it is advisable to position the speaker so that the two ports are aimed towards
the floor.
There are two 4-way hangers built into the back of the MSurround for wall mounting the loudspeaker vertically or horizontally
with the ports pointing in either direction. It is recommended to mount the rubber stand-offs on the back of the side panels
of the MSurround if it is going to be wall mounted. This will minimize the amount of vibration that is transferred directly to
the wall. Consult a person knowledgeable about your wall type to recommend suitable hardware for hanging the speaker.
Usually it is best to leave soundbar off the wall until connections are made.
Connections
After your speakers are properly placed, you are ready to wire your system.
Loudspeaker Connections
Before you connect the speakers turn off all the system components. The M Series loudspeakers
feature gold-plated 5-way binding posts. They can accept bare wires, pin lugs, spade lugs, banana
plugs or dual banana plugs.
The illustration shows the bare wire speaker connection method. Remove about 3⁄8” (10mm) of
the wire insulation. Twist the strands of the wire into a neat bundle. Loosen the top cap by turn-
ing it counter-clockwise until the hole in the center of the terminal post is fully accessible. Insert
the wire through the hole and turn the top cap clockwise by hand to clamp it in place. Do not
use tools to tighten it. Be sure that no strands of wire are able to make contact with the opposite
terminal post. Repeat for the other loudspeaker connections.
If you are using pin lugs, attach them to the wires as specified by the manufacturer. Loosen the top cap by turning it counter-
clockwise until the hole in the center of the terminal post is fully accessible. Insert the pin lug through the hole and turn the
top cap clockwise by hand to clamp it in place. Do not use tools to tighten it. Repeat for the other loudspeaker connections.
Downloaded from www.Manualslib.com manuals search engine
… 6 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Boston Boston M 250 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Boston Boston M 250 in the language / languages: English as an attachment in your email.

The manual is 1,51 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Boston Boston M 250

Boston Boston M 250 User Manual - English, German, French, Italian, Swedish, Spanish - 72 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info