721847

Bostitch IC50-1-E Manual

6
Zoom out
Zoom in
Previous page
1/56
Next page
6
GB
m This tool is intended to be used for fastening wood
to wood in pallet/crate (-1-E / -2-E) and construction
applications (-2-E). DO NOT USE for fastening harder
materials which could cause buckling of the fasteners
and damage to the tool. If you are unsure of the suitability
of this tool for certain applications, please contact your
local sales oce.
LOADING THE TOOL
m Warning! When loading the tool 1) Never place
ahand or any part of the body in fastener discharge
area of the tool; 2) Never point the tool at self or
anyone else; 3) Do not pull the trigger or depress
the safety yoke as accidental actuation may occur,
possibly causing injury.
Note: Use only fasteners recommended by Bostitch
for use in Bostitch tools or nails which meet Bostitch
specifications.
MAGAZINE INSERT (IC50-2-E & IC50-1-E ONLY)
This tool comes with a metal insert for the magazine
foruse with flat coils of nails. To install the insert:
1. Disconnect the tool from the air supply.
2. Open the magazine: Pull down on the latch and
swing the door open (Fig. 1).
Swing magazine cover open. (Fig. 2).
3. Slide one side of the insert plate over the edge of
the magazine cover (Fig. 3) ensuring that the catch is
correctly positioned (Fig. 4).
4. Slide the other side of the insert plate into position so
that the insert is fitted securely in place (Fig. 5).
LOADING (ALL MODELS)
1. Disconnect the tool from the air supply.
2. Open the magazine: Pull down on the latch and
swing the door open. Swing magazine cover open.
(Fig. 6)
3. Check adjustment: the nailer must be set for the
length of nail to be used. Nails will not feed smoothly
if the magazine is not correctly adjusted. To adjust
the magazine, refer to ‘Adjusting the Magazine’
shown below.
4. Load the coil of nails: Place the coil of nails over the
post in the magazine. Uncoil enough nails to reach
the feed pawl. Place the first nail in front of the front
tooth on the feed pawl, in the driver channel. The nail
heads must be in the slot in the nose. (Fig. 7)
5. Swing the door/magazine cover closed. Check that
the latch engages when released. (If it does not
engage, check that the nail heads are in the slot in
the nose.)
m Warning!
•
IMPORTANT SAFETY INFORMATION ENCLOSED.
•
READ THIS MANUAL BEFORE OPERATING THE TOOL.
•
SAVE FOR FUTURE REFERENCE.
•
FAILURE TO OBSERVE THE FOLLOWING
WARNINGS COULD RESULT IN INJURY.
•
Do not use damaged, frayed or
deteriorated air hoses and fittings.
•
Air powered tools can vibrate in use.
Vibration, repetitive motions or
uncomfortable positions may be harmful
to your hands and arms. Stop using any
machine if discomfort, tingling feeling
or pain occurs. Seek nedical advice
before resuming use.
•
Do not carry the tool by the hose.
•
Keep body stance balanced and firm.
Do not overreach when operating this tool.
•
Always turn o the air supply and
disconnect the air supply hose before
installing, removing or adjusting any
accessory on this tool, or before
parforming any maintenance on this tool.
•
Use protective equipment such as
glasses, gloves, safety shoes as well
as acoustic protection. Remain vigilant,
use common sense and pay attention
when using the machine.
•
Always wear suitable CE marked
eye protection when operating or
performing maintenance on this tool.
MAX
PSI
•
Operate at no more than the tool’s
maximum pressure stated in column
“I” of the technical data table.
•
Do not over-oil and do not use heavy
grade oil as stalling and low
performance may result.
© BOSTITCH 2019
GB Not to be reproduced without permission. Unauthorised copies of this document do not constitute CE
compliance for the products.
FR Reproduction interdite sans permission préalable. Les copies non autorisées de ce document ne signifient en
rien que les produits soient conformes aux normes CE.
DE Vervielfältigung nicht ohne Genehmigung gestattet. Unzulässig erstellte Kopien dieses Dokuments erfüllen
nicht die CE-Richtlinien für Produkte.
NL Mag niet worden vermenigvuldigd zonder toestemming. Onrechtmatige kopieën van dit document willen niet
zeggen dat de producten voldoen aan de CE-vereisten.
DK Må ikke gengives uden tilladelse. Uautoriserede kopier af dette dokument udgør ikke CE overholdelse for
produkterne.
FI Ei saa jäljentää ilman lupaa. Tämän asiakirjan ilman valtuutusta tehdyt kopiot eivät muodosta tuotteille CE-
yhdenmukaisuutta.
GR Απαγορεύεται η αναπαραγωγή χωρίς προηγούμενη άδεια. Τα μη εξουσιοδοτημένα
αντίγραφα του παρόντος εγγράφου δεν αποτελούν συμμόρφωση CE για τα προϊόντα.
IT Vietata la riproduzione senza permesso. Le copie non autorizzate di questo documento non garantiscono la
conformità CE per i relativi prodotti.
NO Skal ikke reproduseres uten tillatelse. Ikke godkjente kopier av dette dokumentet oppfyller ikke kravene for
CE-merking for produktet.
PT Reprodução proibida sem autorização prévia. As cópias não autorizadas deste documento não estão em
conformidade com a CE para os produtos.
ES Prohibida la reproducción sin permiso. Las copias no autorizadas de este documento no suponen la
conformidad con las normas CE de los productos.
SE Prohibida la reproducción sin permiso. Las copias no autorizadas de este documento no suponen la
conformidad con las normas CE de los productos.
PL Niniejszy dokument nie może być kopiowany bez pozwolenia. Nieautoryzowane kopie niniejszego dokumentu
nie stanowią deklaracji zgodności CE prezentowanych produktów.
CZ Niniejszy dokument nie może być kopiowany bez pozwolenia. Nieautoryzowane kopie niniejszego dokumentu
nie stanowią deklaracji zgodności CE prezentowanych produktów.
SK Rozmnožovanie bez povolenia je zakázané. Neoprávnené kópie tohto dokumentu nie sú v súlade s CE pre dané
výrobky.
HU A dokumentum engedély nélkül nem sokszorosítható. Az engedély nélkül sokszorosított dokumentum nem
jelenti a termék CE-megfelelőségét.
RO Reproducerea neautorizată este interzisă. Copiile neautorizate ale acestui document nu reprezintă
conformitatea CE pentru produse.
… 6 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bostitch IC50-1-E at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bostitch IC50-1-E in the language / languages: All languages as an attachment in your email.

The manual is 2,37 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info