721919
7
Zoom out
Zoom in
Previous page
1/39
Next page
GB
7
TRIGGER OPERATED (FIG 6)
The Trigger Operated model is cycled by actuation of the
trigger.
• Raise the secondary trigger device (6.1)
Keeping the secondary trigger device pulled, activate
the operating trigger (6.2) to fire a fastener.
Releasing the secondary safety trigger and the
operating trigger simultaneously will automatically
lockout the operating trigger (6.3) preventing the tool
from being actuated.
m Warning! While the secondary trigger device is
pulled, the tool will fire a fastener each time the operating
trigger is activated.
For maximum power: rotate valve anticlockwise as far as
possible. (6.4)
To reduce power: rotate valve clockwise for up to 30%
reduction.
AUTOMATIC (FIG 6/7)
The automatic model is cycled by actuation of the trigger.
To actuate the tool: raise the secondary trigger device
(6.1)
Keeping the secondary trigger device pulled, activate
the operating trigger (6.2) to fire a fastener.
When the trigger is pulled lightly with a short motion the
tool will drive one fastener. (7.1) When the trigger is
pulled as far as possible the tool will continuously drive
fasteners automatically until the trigger is released. (7.2)
The rate at which fasteners are driven in the automatic
mode is adjustable. (7.3)
Releasing the secondary safety trigger and the
operating trigger simultaneously, will automatically
lockout the operating trigger (6.3) preventing the tool
from being actuated.
m Warning! While the secondary trigger device is
pulled, the tool will fire up to 30 times a second when the
trigger is activated in automatic mode.
The speed adjustment screw is located on the left side
of the tool in the trigger valve area. (7.3) Turning the
screw in a counter clockwise direction increases speed
and in a clockwise direction decreases speed. This
model also includes a trigger free play adjustment (7.4)
to adjust the amount of trigger stroke between single
and automatic operation.
For maximum power: rotate valve anticlockwise as far as
possible. (6.4)
To reduce power: rotate valve clockwise for up to 30%
reduction.
TOOL OPERATION CHECK:
m Warning! Remove all fasteners from tool before
performing tool operation check.
TRIGGER OPERATED TOOL:
A. With finger o the trigger, hold the tool with a firm grip
on the handle.
B. Place the nose of the tool against the work surface.
C. Raise the secondary trigger device.
D. Pull the trigger to cycle the tool. Release the trigger and
cycle is complete.
m Warning! With the secondary trigger device raised,
the tool will cycle each time the trigger is pulled!
AUTOMATIC TOOL:
A. With finger o the trigger, hold the tool with a firm grip
on the handle.
B. Place the nose of the tool against the work surface.
C. Raise the secondary trigger device
D. Single cycle mode - Lightly pull the trigger for a single
cycle. Release the trigger and
cycle is complete.
E. Automatic mode - Pull trigger as far as possible to
depress both valve stems. Release the trigger to stop.
m Warning! With the secondary trigger device raised,
the tool will cycle each time the trigger is pulled!
m Warning! With the secondary trigger device raised,
the tool will cycle at up to 30 times a second when the
trigger is pulled in automatic mode.
ALL MODELS ADDITIONAL WARNINGS:
m Warning: The secondary trigger device should be
checked periodically, to ensure it is operating correctly.
While following the above tool operation check notes,
release the secondary safety trigger and the operating
trigger simultaneously, this should automatically lockout
the operating trigger, preventing the tool from being
actuated.
The tool should only then operate again when the
secondary trigger device is raised and the operating
trigger is depressed.
m Warning: If the tool fails to work correctly contact you
local BOSTITCH service centre or distributor for advice
before continuing to use it.
m Warning: Under no circumstances should the
secondary trigger device or the operating trigger be
by-passed, modified or removed.
© BOSTITCH 2019
GB Not to be reproduced without permission. Unauthorised copies of this document do not constitute CE
compliance for the products.
FR Reproduction interdite sans permission préalable. Les copies non autorisées de ce document ne signifient en
rien que les produits soient conformes aux normes CE.
DE Vervielfältigung nicht ohne Genehmigung gestattet. Unzulässig erstellte Kopien dieses Dokuments erfüllen nicht
die CE-Richtlinien für Produkte.
NL Mag niet worden vermenigvuldigd zonder toestemming. Onrechtmatige kopieën van dit document willen niet
zeggen dat de producten voldoen aan de CE-vereisten.
DK Må ikke gengives uden tilladelse. Uautoriserede kopier af dette dokument udgør ikke CE overholdelse for
produkterne.
FI Ei saa jäljentää ilman lupaa. Tämän asiakirjan ilman valtuutusta tehdyt kopiot eivät muodosta tuotteille CE-
yhdenmukaisuutta.
GR Απαγορεύεται η αναπαραγωγή χωρίς προηγούμενη άδεια. Τα μη εξουσιοδοτημένα
αντίγραφα του παρόντος εγγράφου δεν αποτελούν συμμόρφωση CE για τα προϊόντα.
IT Vietata la riproduzione senza permesso. Le copie non autorizzate di questo documento non garantiscono la
conformità CE per i relativi prodotti.
NO Skal ikke reproduseres uten tillatelse. Ikke godkjente kopier av dette dokumentet oppfyller ikke kravene for
CE-merking for produktet.
PT Reprodução proibida sem autorização prévia. As cópias não autorizadas deste documento não estão em
conformidade com a CE para os produtos.
ES Prohibida la reproducción sin permiso. Las copias no autorizadas de este documento no suponen la
conformidad con las normas CE de los productos.
SE Prohibida la reproducción sin permiso. Las copias no autorizadas de este documento no suponen la
conformidad con las normas CE de los productos.
PL Niniejszy dokument nie może być kopiowany bez pozwolenia. Nieautoryzowane kopie niniejszego dokumentu
nie stanowią deklaracji zgodności CE prezentowanych produktów.
CZ Niniejszy dokument nie może być kopiowany bez pozwolenia. Nieautoryzowane kopie niniejszego dokumentu
nie stanowią deklaracji zgodności CE prezentowanych produktów.
SK Rozmnožovanie bez povolenia je zakázané. Neoprávnené kópie tohto dokumentu nie sú v súlade s CE pre dané
výrobky.
HU A dokumentum engedély nélkül nem sokszorosítható. Az engedély nélkül sokszorosított dokumentum nem
jelenti a termék CE-megfelelőségét.
RO Reproducerea neautorizată este interzisă. Copiile neautorizate ale acestui document nu reprezintă
conformitatea CE pentru produse.
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bostitch 21684 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bostitch 21684 in the language / languages: All languages as an attachment in your email.

The manual is 2,19 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info