571317
68
Zoom out
Zoom in
Previous page
1/72
Next page
CARE & MAINTENANCE
52
EnglishDeutschEspañolFrançaisItalianoNederlandsSvenska Dansk
Microphone is encountering
feedback.
Orient the microphone so that it is not pointing directly at its respective L1
TM
Cylindrical Radiator
®
loudspeaker.
Try a different microphone.
Try a different position for the L1 system and/or vocalist on stage.
Increase the distance from the L1 system to the microphone.
Reduce the HIGH frequencies by adjusting the zEQ on the microphone channel.
Try notching out a particular frequency that could be causing the feedback by adjusting the Para EQ on the
microphone channel.
Temporarily bypass any audio effects used (Mod, Delay, Reverb) to see if they might be contributing to the feed-
back problem.
Aux output does not sound
right.
Check if the Aux output is configured for the desired tap point for each input channel. Refer to “Routing input
signals to the Aux output” on page 26.
Note: No reverb comes from the Aux output even if the tap point is Pre or Post.
Verify that each input assigns the desired signal level to the Aux output.
Unable to send T1 audio to
a computer through a USB
connection.
Check that the USB cable is properly connected to the audio engine and computer.
Try a different USB cable.
Make sure the audio engine is turned on.
Verify that the desired audio engine input channels are assigned to the left and right USB output channels. See
“USB to PC” in the Prefs menu.
Make sure that the Trim level of the respective input channel is turned up enough so that the green LED is on,
indicating that there is a strong input signal.
Check the Input and Output level meters under the Prefs menu to confirm that there is a signal at both the input
and output stages.
Verify that your computer USB input is working by connecting another USB-compatible audio device.
If you are using recording software on a computer, check the software requirements. You may need to configure
the software settings for 48kHz/24-bit operation.
Problem What to do
68


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bose T1 ToneMatch audio engine at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bose T1 ToneMatch audio engine in the language / languages: English as an attachment in your email.

The manual is 2,76 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Bose T1 ToneMatch audio engine

Bose T1 ToneMatch audio engine User Manual - Dutch - 63 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info