571317
66
Zoom out
Zoom in
Previous page
1/72
Next page
CARE & MAINTENANCE
50
EnglishDeutschEspañolFrançaisItalianoNederlandsSvenska Dansk
T1 is on, but there is no
sound – Continued.
If using the T1 with an L1 model II system:
Turn off the power stand, re-seat the ToneMatch
TM
cable plug in the ToneMatch port, and turn on the power
stand again.
If available, try a different ToneMatch cable. If another ToneMatch cable is not available, try a standard ethernet
cable.
Connect the T1 Master output to the Analog Input on the power stand using a ¼" phone plug cable. Turn up the
power stand Trim control, and verify that you hear sound.
Make sure power LED on power stand is blue. If LED is red, please call Bose Live Music Customer Support at
(877) 335-2673 for assistance.
If using the T1 with an L1 model I system:
Make sure the T1 Master output is connected to the Channel 3 or 4 Line IN on the power stand. Turn up the
power stand Channel 3/4 line input Level and verify that the system is producing sound.
If using the R1 remote control with the system, make sure the R1 Master volume is turned up.
Make sure power LED on power stand is green. If LED is red, please call Bose Live Music Customer Support at
(877) 335-2673 for assistance.
Poor quality sound from a
microphone or instrument
connected to the T1.
Make sure there is no unwanted zEQ or Para EQ equalization applied.
Verify that you have selected an appropriate ToneMatch
TM
engine preset for your microphone/instrument. If you
do not want to use a ToneMatch engine preset, make sure ToneMatch is set to Flat.
Make sure there are no unwanted effects (Comp/Gate, Mod, Delay, Reverb) on your input channel. Check the
Status in the Prefs menu for any currently active effects.
Check that the T1 input Trim is adjusted properly for your microphone/instrument. The signal LED should be
green; if the LED is red, lower the Trim level until it is green.
Try a different microphone or instrument cable.
Check the cable connecting your microphone or instrument to the T1 audio engine. Make sure the cable plug is
fully inserted into the microphone/instrument output connector and the T1 input connector.
Check the settings (if any) on your microphone or instrument.
Check the batteries (if any) in your instrument or microphone.
Problem What to do
66


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bose T1 ToneMatch audio engine at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bose T1 ToneMatch audio engine in the language / languages: English as an attachment in your email.

The manual is 2,76 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Bose T1 ToneMatch audio engine

Bose T1 ToneMatch audio engine User Manual - Dutch - 63 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info