159841
9
Zoom out
Zoom in
Previous page
1/12
Next page
9
YOUR SL2 WIRELESS SURROUND LINK
English Deutsch FrançaisDansk Español Italiano SvenskaNederlands
Troubleshooting
Problem What to do
Blinking red Status
LED on either the
SL2 transmitter or
receiver
Disconnect the unit from the AC power outlet.
Remove any possible obstruction to ventilation and reposition the unit upright with
clear space around the ventilation openings on each side. If the ventilation was
obstructed, allow the unit a few minutes to cool before reconnecting it to the AC power
outlet.
If it continues to blink red, check the cable connection between the SL2 receiver and
the surround speakers. Make sure the connections are secure and the cable wires are
not touching each other, which can cause a short circuit. Refer to
“Connecting the SL2
receiver” on page 7. Reconnect the unit to the AC power outlet.
If it continues to blink red, unplug the unit from the power outlet and contact Bose
®
Customer Service. Refer to the address list included in the SL2 carton.
No sound or
intermittent
sound
Make sure the audio source is playing and the program selected includes surround
sound audio.
Check to be sure both the SL2 transmitter and receiver power packs are properly
plugged into functioning AC power outlets. Refer to
“Making the connections” on
page 6.
Make sure that cables are properly connected to the SL2 transmitter, the Acoustimass
®
module, the SL2 receiver, and the surround speakers. The connectors must be
inserted securely in the jacks.
Make sure the SL2 transmitter and receiver are no less than 6
1
/
2
feet (2 meters) and no
more than 30 feet (9.2 meters) apart.
Locate the small opening labeled Reset on the bottom of both the SL2 transmitter and
the SL2 receiver. Using a fine-pointed tool (like a straightened paper clip), press inside
the opening on the transmitter. And, within 30 seconds, in the same way press inside
the opening on the receiver.
Move the receiver, the transmitter, or both so the transmission path between them
does not intersect with large metal objects in your room or other obstructions (like a
fish tank full of water).
Interference with a
wireless (5.8GHz)
phone
Increase the distance from each SL2 unit to the phone.
Press the channel button on the phone (if one is provided) to choose a different
channel
for phone transmissions.
Contacting Customer Service
For additional help in solving problems, contact Bose Customer Service. Refer to the address
sheet included in the carton.
02_Introduction.fm Page 9 Monday, August 7, 2006 9:53 AM
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bose sl 2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bose sl 2 in the language / languages: English as an attachment in your email.

The manual is 0,78 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info