571132
26
Zoom out
Zoom in
Previous page
1/32
Next page
26
Positioning and securing the
loudspeaker
1. Align the holes of the loudspeaker arm and bracket.
2. Insert, but DO NOT TI
GHTEN, the fastener:
P2 Phillips head
Theft-deterrent 3mm pin-in-hex head
3. Adjust the loudspeaker to the desired angle.
4. Support the loudspeaker at the desir
ed angle, then fully tighten
fastener to secure the loudspeaker in position.
Note: Do not overtighten screws. If using a power drill, set to a low
torque setting.
CAUTION: DO N
OT attempt to change the loudspeaker’s position
without completely loosening the fastener. Damage could occur if the
fastener is not completely loosened
before trying to adjust the
loudspeaker angle.
Placering og sikring af højttaler
1. Juster hullerne på højttalerens arm og beslag.
2. Isæt men STRAM IKKE befæst
elseselementet:
P2 Phillips-hoved
Tyveripræventivt 3 mm skruehoved
3. Juster højttaleren til den ønskede vinkel.
4. Understøt højttaleren i den ønskede vinkel, stram
befæst
elseselementet for at fastgøre højttalerens position.
Bemærk: Stram ikke skruerne for hårdt. Ved brug af en elektrisk
boremaskine skal den indstilles til en lav momentindstilling.
FORSIGTIG: FORSØG IKKE at ændre højttalerens position uden at
løsne
befæstelseselementet helt. Der kan opstå skader, hvis
befæstelseselementet ikke er helt løsnet
inden forsøg på at justere
højttalerens vinkel.
Positionieren und Sichern des
Lautsprechers
1. Richten Sie die Löcher am Lautsprecherarm und an der
Halterung aus.
2. Setzen Sie das Befestigungswerkzeug ein, ab
er ziehen Sie
es nicht fest:
P2 Kreuzschlitz
3-mm-Inbus
3. Stellen Sie den Lautsprecher auf
den gewünschten Winkel ein.
4. Halten Sie den Lautsprecher im gewünschten Winkel und ziehen
Si
e das Befestigungswerkzeug dann fest, um den Lautsprecher
in seiner Position zu sichern.
Hinweis: Ziehen Sie die Schrauben nicht zu fest an. Wenn Sie einen
Akkuschrauber verwenden, stellen Sie eine niedrige Geschwindigkeit ein.
ACHTUNG: Ändern Sie NICHT die Lautspr
echerposition, ohne das
Befestigungswerkzeug vollständig zu lösen. Wenn das
Befestigungswerkzeug nicht vollständig gelöst ist,
bevor Sie den
Lautsprecherwinkel ändern, kann es zu Beschädigungen kommen.
Colocación y fijación del altavoz
1. Alinee los agujeros del brazo del altavoz y del soporte.
2. Inserte el perno de fijación, pero SIN APRE
TARLO:
Cabeza Phillips P2
Cabeza de pin en hexágono de 3 mm antirrobo
3. Ajuste el altavoz con el ángulo deseado.
4. Apoye el altavoz con el ángulo deseado
y, a continuación, apriete
completamente el perno de fijación para asegurar el altavoz en
su posición.
Nota: No ajuste los tornillos en exceso. Si utiliza un destornillador
eléctrico, ajústelo a un par de apriete
PRECAUCIÓN: NO
intente cambiar la posición del altavoz sin liberar
completamente e l perno de fijación. Pueden producirse daños si no
libera completamente el perno de fijación
antes de intentar ajustar el
ángulo del altavoz.
Mounting the Loudspeaker to the Bracket
26


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bose Freespace DS 100se at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bose Freespace DS 100se in the language / languages: Dutch as an attachment in your email.

The manual is 3,37 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Bose Freespace DS 100se

Bose Freespace DS 100se Specifications - English - 8 pages

Bose Freespace DS 100se Installation Guide - English, German, Dutch, Danish, French, Italian, Swedish, Spanish - 16 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info