10
89 (Drying)
You can activate, deactivate and set the drying function by touching this option button. The
auto dry mode must be used for washing and drying without interruption; when the single
drying programme is selected, you can choose auto dry, or time dry with a desired drying time.
Set the drying time aPage 8
ʑ
Additional functions
See also Programme overview aPage 7
Select or cancel the additional function with the ē Quick and ÷Rinse Plus buttons.
The indicator lights of the buttons come on if additional functions are active.
Switching off the additional option: touch the button again. The indicator light goes out.
You can select two additional functions at the same time for some programmes.
ē Quick Shorten the washing time. For slightly soiled items.
cRinse Plus
Additional rinse cycle. Prolonged programme duration. For
regions with very soft water or for further improving the
washing result.
ʑ
Start/Reload
For starting or pausing the washing/drying programme.
ʑ
Hibernate mode
The back light of the display will go out if the machine is not operated for 5 minutes before the
programme starts, when the finish-in time starts counting down, or the programme ends. Touch
any button first to activate the back light, then you can operate the machine.
ʑ
Signal volume (for button signal and information signal)
ʑ
Childproof lock ( Programme will not be changed by accidental operation.
To activate the childproof lock:
After the programme starts or finish-in time is activated aPage 10, press and hold the
(Finish in) button for 5 seconds.
Release when the ( symbol lights up. If button signal is on, an acoustic signal will be heard.
When the programme ends, the Start/Reload indicator remains on to remind you to
deactivate the childproof lock.
To deactivate the childproof lock:
Touch the (Finish in) button until the ( symbol turns off.
Release the button.
( symbol flashes if the programme has been changed while childproof lock is activated. If the
childproof lock is deactivated while the programme selector is in a different position from when
the childproof lock was activated, the programme which is currently running be halted.
11
Please close the door immediately because the water level is rising. In pause status, and
are displayed alternately.
In pause status, is flashing if the spin speed is high, please just wait to let the spin speed
drop down
. If is continuously display in pause status then it means door is locked due to
safety reasons(water level and/or temperature are too high). For the washing programme: If you
need to open the door, wait for the temperature to drop or drain the water (e.g. select the Spin
or > Drain programme).
For the drying programme: If you need to open the door, wait for the temperature drop or set
the time dry programme for 15 minutes to allow the laundry to cool down.
The door cannot be locked/unlocked due to the high temperature of the door lock. Keep the
machine switched on for about 1 minute. Then the machine can be locked/unlocked again.
The door cannot be opened after the drying programme because the temperature is too high.
The cooling process will continue until this display disappears and the door can be opened. If the
laundry needs to be removed as soon as possible, select the { Intensive Drycprogramme with a
time dry period of 15 minutes to allow the laundry to cool down
.
No water supply during washing
Tap turned on? Supply hose kinked or blocked?
Inlet filter blocked? Clean the filter aInstallation and maintenance instructions, Page 8
No water supply during drying
Tap turned on? Inlet filter blocked? Cooling water valve faulty?
Clean the drain pump. aInstallation and maintenance instructions, Page 8;
outlet pipe/drainage hose blocked.
Flashing: The machine detected an imbalance in the drum that cannot be adjusted. The
maximum spin speed cannot be reached in order to protect the machine. The washing solution
will not be removed completely after spinning, and the subsequent drying programme is
automatically stopped.
If the drying cycle stops and ¤flashes on the display, the cooling programme will keep
running automatically until ¤disappears and the door can be opened.
- Wash or dry small and large items of laundry together.
After the auto drying cycle, the symbols and §Ê are displayed alternately, suggesting that the
drying result may not be satisfactory.
: the amount of laundry is too much. : the amount of laundry is too little.
Other displays
Switch off the appliance, wait 5 seconds and switch it back on.
If the display appears again, call customer service.
Safety instructions
Read and follow the operating and installation and maintenance instructions and all other information
enclosed with the washer dryer.
Retain documents for subsequent use.
Risk of electric shock
Never pull out the mains plug by pulling on the power cord.
Never insert/pull out the mains plug with wet hands.
Risk of death
For worn-out appliances:
Pull out the mains plug.
Sever the power cord and discard together with the plug.
Destroy the lock on the washer dryer door. This will prevent children from
locking themselves in and putting their lives at risk.
Risk of suffocation
Keep packaging, plastic film and packaging parts out of the reach of children.
Risk of poisoning
Keep detergents and care products out of the reach of children.
Risk of explosion
Items of laundry pretreated with cleaning agents containing solvents, e.g. stain
remover/cleaning solvents may lead to an explosion after being loaded into the
washer dryer. Rinse items of laundry thoroughly by hand beforehand.
Risk of injury
Washer dryer door may become very hot.
Take care when draining hot detergent solution.
Do not climb onto the washer dryer.
Do not lean on the washer dryer door when it is open.
Do not touch the drum in case it is still spinning.
Ensure that the pump cap is screwed on while the machine is running to prevent
water from leaking out and coming into contact with moving pump parts.
If a drying programme was interrupted, the washer dryer and the laundry may
be very hot, select { Intensive Drycor 8 Gentle Dry and set the programme
to 15 minutes to allow the laundry to cool down, then remove the laundry.
Information on the display
