746720
57
Zoom out
Zoom in
Previous page
1/68
Next page
Troubleshooting en
57
Fault Cause troubleshooting
Water is not flowing in. De-
tergent is not being dis-
pensed.
The filters in the water inflow
are blocked.
"Clean the filters in the water in-
flow" →Page52.
The tap is turned off. Turn on the tap.
The water inlet hose is
kinked or jammed.
Ensure that the water inlet hose is
not kinked or jammed.
The spin cycle runs several
times.
The unbalanced load detec-
tion system eliminates an im-
balance by repeatedly redis-
tributing the laundry.
Not a fault – no action required.
Note:When loading, where possible,
place large and small items of laundry
together in the drum. Different sized
items of laundry distribute themselves
better during the spin cycle.
The programme duration
changes during the wash
cycle.
The programme operation is
optimised electronically.
This may change the pro-
gramme duration.
Not a fault – no action required.
The unbalanced load detec-
tion system eliminates an im-
balance by repeatedly redis-
tributing the laundry.
Not a fault – no action required.
Note:When loading, where possible,
place large and small items of laundry
together in the drum. Different sized
items of laundry distribute themselves
better during the spin cycle.
Foam detection system
switches on a rinse cycle if
foam build-up is too high.
Not a fault – no action required.
No water is visible in the
drum.
Water is below the visible
area.
Not a fault – no action required.
Drum jerks after the pro-
gramme starts.
This is caused by an internal
motor test.
Not a fault – no action required.
Residual water is present in
the compartment ⁠.
Insert in compartment is
blocked.
→"Cleaning the detergent drawer",
Page47
Vibrations and movement of
the appliance whilst spin-
ning.
Appliance is not correctly
aligned.
Aligning the appliance
The appliance feet are not
fixed.
Secure the appliance feet. Aligning
the appliance
Transit bolts have not been
removed.
Removing the transit bolts
Drum does not turn, water
does not flow in.
Load detection is active. Not a fault – no action required.
Note:The load detection can take up
to two minutes.
57


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bosch WAX32MH9GB at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bosch WAX32MH9GB in the language / languages: English as an attachment in your email.

The manual is 5,33 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info