777041

Bosch UniversalHedgeCut 18 50 Manual

14
Zoom out
Zoom in
Previous page
1/236
Next page
14 | English
Cordless hedge trimmer UniversalHedgeCut 18V-50 UniversalHedgeCut 18V-55
Recommended ambient temperat-
ure during charging °C 0... +35 0... +35
Permitted ambient temperature
during operation B) and storage °C -20... +50 -20... +50
Battery type PBA 18V...W-.
1.5 Ah, 2.0 Ah, 2.5 Ah, 3.0 Ah,
4.0 Ah, 5.0 Ah, 6.0 Ah
PBA 18V...W-.
1.5 Ah, 2.0 Ah, 2.5 Ah, 3.0 Ah,
4.0 Ah, 5.0 Ah, 6.0 Ah
A) Depends on battery in use
B) Limited performance at temperatures <0°C
Noise/Vibration Information
3600H49 K.. 3600H49 J..
Noise emission values determined according to EN62841-4-2:2019
Typically the A-weighted noise levels of the product are:
– Sound pressure level dB(A) 74 74
– Sound power level dB(A) 94 94
– Uncertainty K dB 2 2
Vibration total values ah (triax vector sum) and uncertainty K determined according to EN62841-4-2:2019
– Vibration emission value ahm/s2< 2.5 < 2.5
– Uncertainty K m/s21.5 1.5
That the declared vibration total value(s) and the declared
noise emission value(s) have been measured in accordance
with a standard test method any may be used for comparing
one tool to another.
That the declared vibration total value(s) and the declared
noise emission value(s) may also be used in a preliminary as-
sessment of exposure.
That the vibration and noise emissions during actual use of
the power tool can differ from the declared values depend-
ing on the ways in which the tool is used especially what kind
of workpiece is processed; and of the need to identify safety
measures to protect the operator that are based on an estim-
ation of the exposure measures in the actual conditions of
use (taking account of all parts of the operating cycle such as
the times when the tool is switched off and when it is running
idle in addition to the trigger time).
Switching on
For Your Safety
uCaution: Switch garden tool off and remove battery
from machine before adjusting or cleaning.
uThe blades continue to move for a fraction of a second
after the hedge trimmer is switched off.
uDo not touch the moving blades.
Inserting/removing the battery (see figureB)
Note: Using unsuitable batteries can lead to malfunctions or
damage the machine.
Insert the charged battery (10). Make sure that the battery
is fully fitted. A click can be heard when it engages.
To remove the battery (10) from the machine, press the bat-
tery unlocking button (9) and pull the battery out.
Battery charge-control indicator (see figure C)
The battery charge-control indicator informs you of the re-
maining battery capacity when the On/Off switch is pressed.
LED Capacity
Continuous lighting 3x green ≥ 75%
Continuous lighting 2x green 40 − 75%
Continuous lighting 1x green 15 − 40%
Slow flashing 1x green 0 − 15%
The three LEDs of the battery charge-control indicator flash
rapidly when the battery temperature is not within the oper-
ating range of -20 to +65°C and/or when the overload pro-
tection has responded.
Operation
Switching On and Off (see figuresD − E)
Once battery is attached and you hear the “click” (see figure
B), to operate the product, pull front trigger (4) and rear
trigger (2) together.
To switch off the product, either release rear trigger (2) or
front trigger (4) or both together.
F 016 L94 155 | (05.05.2021) Bosch Power Tools
… 14 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bosch UniversalHedgeCut 18 50 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bosch UniversalHedgeCut 18 50 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian as an attachment in your email.

The manual is 4.7 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Bosch UniversalHedgeCut 18 50

Bosch UniversalHedgeCut 18 50 Additional guide - English, German, Dutch, Danish, French, Italian, Polish, Swedish, Turkish, Spanish, Norwegian - 8 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info