780662
15
Zoom out
Zoom in
Previous page
1/24
Next page
Service and Operation
15
TR5500T – 6 720 875 994 (2018/01)
9 Service and Operation
The hot water temperature may be set between * and 85 °C using
the dial. We recommend the setting of 60 °C. Heat wastage and
calcification are lowest here.
As hot water is extracted the amount of hot water available in
the reservoir decreases. The less hot water available, the fewer LEDs
are lit up.
The heating period is dependent upon the volume of water in the reservoir,
the cold water intake temperature, and the set heat output.
See technical data table (page 12)
The hot water storage unit may be used optionally for
closed (pressurised) operation
suitable for service of multiple tapping points
open (de-pressurised) operation
suitable for service of one tapping point
There are three variations of electrical connections to choose from:
Single-power operation
Reheating occurs automatically subject to the power supply.
The button “fast-heating” is only used for the reset
and diagnostic routine functions (technician).
Double-power operation
During off-peak periods, the hot water storage unit
automatically heats the contents of the reservoir at
the configured basic performance. The quick heating may be
activated by pressing the fast-heating button .
As the device is heating up the LED lights up, before going
out again as soon as the set temperature is reached. The “fast-
heating” switches itself off automatically.
Boiler mode operation
In this mode the hot water storage unit heats the contents of
the reservoir once upon the initial operation at the connected
and configured basic performance. Each further heating proce-
dure must be started manually by pressing the button fast-
heating .
10 LED display anode and service
In normal operations, the LED “anode” is constantly lit,
the LED “service” is off.
If these conditions are not respected an “error condition” occurs.
To begin with, please reset the device RESET. To do this, proceed
as follows:
Firstly turn the dial to the setting “●”.
After that, press the “fast-heating” button .
If the cause of the error condition does not exist directly after the reset,
the device will again return to its normal mode of function. Otherwise
the device will again indicate an “error condition”.
In this case please contact the customer service operator.
11 Cleaning
Wipe with a damp cloth. Do not use any sharp or coarse cleaning
products.
Do not use a steam cleaner.
12 Customer Service
In order to avoid hazards, repairs may only be carried out by
a customer service operator licensed by us.
The initial service through our customer service operator should take place
around two years after the first operation. At this time, the device will
potentially be decalcified. Afterwards, the customer service operator will
recommended a date for the next service. Specify the E-No. and FD-No.
when phoning the customer service operator!
When requesting customer service, please enter the E-No. and
the FD-No. of your device.
You will find the numbers on identification plate between the water
access pipes of the reservoir.
13 Disposal
Subject to change.
This appliance is labelled in accordance with European
Directive 2012/19/EU concerning used electrical and
electronic appliances (waste electrical and electronic
equipment – WEEE). The guideline determines the framework
for the return and recycling of used appliances as applicable
throughout the EU.
Please ask your specialist retaller about current disposal
facilities.
E-Nr. FD
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bosch Tronic 5500T at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bosch Tronic 5500T in the language / languages: English, German as an attachment in your email.

The manual is 3.41 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info