780662

Bosch Tronic 5500T Manual

13
Zoom out
Zoom in
Previous page
1/24
Next page
In case of fault
13
TR5500T – 6 720 875 994 (2018/01)
6 In case of fault
If your device does not function as intended, it is usually due to a small
detail. Please check whether or not the fault can be self-repaired
according to the following indicators. You will thereby avoid the costs
of an unnecessary repair service.
In normal operations, the LED “anode” is constantly lit,
the LED “service” is off.
If one of the two LEDs flashes, this indicates an “error condition”.
In case of fault, do not disconnect the power supply line.
In order to possibly remedy the error condition oneself, there are
two procedures:
RESET: To begin with, please reset the device RESET. To do this,
proceed as follows:
Firstly, turn the dial to the setting “●”.
After that, press the “fast-heating” button .
If the cause of the “error condition” does not exist directly after the
reset, the device will again return to its normal mode of function.
Otherwise the device will again indicate an “error condition”.
1. anode LED
2. service LED
3. fast-heating LED
4. fast-heating button
5. water temperature dial
Boiler mode operation 1/N/PE~230 V 1 kW 1 kW 1/N/PE~230 V // 1 x min 10 A
1/N/PE~230 V 2 kW 2 kW 1/N/PE~230 V // 1 x min 10 A
Current limits 1/N/PE~230 V 3 kW 3 kW 1/N/PE~230 V // 1 x min 16 A
2/N/PE~230 V 1 kW 1 kW 2/N/PE~400 V // 2 x min 10 A
Secure load 2/N/PE~230 V 2 kW 2 kW 2/N/PE~400 V // 2 x min 10 A
2/N/PE~230 V 3 kW 3 kW 2/N/PE~400 V // 2 x min 16 A
3
e
1
2
1
5
4
3
Display (LED) Status
Cause / Fault Solution Who
Anode Service Fast Heating
On On Flashing Internal electronic locked Electronic board locked, wait 15mins and then reset. Technician
On On Off
The reservoir has heated with-
out water
Turn the device off, check the cause of the water shortage
(leakage, faulty water connection).
If the problem remains contact technician.
Technician
Water temperature in reservoir
too hot
Reset, wait until the reservoir has cooled.
If the problem remains please contact technician. Technician
Internal electronic failure Reset, if the problem remains please contact technician. Technician
On Flashing Off Internal electronic failure Reset, if the problem remains please contact technician. Technician
Aus Flashing On/Off
(see below) Anode fault Check that the reservoir is filled.
If the problem remains please contact technician. Technician
… 13 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bosch Tronic 5500T at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bosch Tronic 5500T in the language / languages: English, German as an attachment in your email.

The manual is 3.41 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info