323608
11
Zoom out
Zoom in
Previous page
1/106
Next page
11
Caution: The steam hose, base station and
in particular the iron can get very hot when
used!!
This appliance has been designed exclusively
for domestic use and must not be used for
professional purposes.
A) Introduction
Thank you for buying the Professional Steam Sta--
tion sensixx B15L from Bosch. Please read these
instructions very well. They contain valuable infor--
mation about the unique features of this system
and some hints to make the ironing easier.
This system produces non stop steam for an ideal
ironing performance. We hope you enjoy ironing
with this steam station.
B) General description
1. “Steam ready” pilot light
2. “Water empty” pilot light
3. Variable steam control dial
4. Main switch (STEAM IRON/off/DRY IRON)
5. Plastic cover of boiler plug
6. Boiler plug
7. Cord storage compartment / Automatic cable
rewind.
8. Cable rewind control button
9. Water inlet
10. Water tank
11. Steam release button
12. Temperature dial
13. Iron pilot light
14. Lock button for permanent steam
15. Steam hose
16. Iron stand
17. Water tank plug
C) Getting Ready
1. Remove any label or protective covering from
the sole plate.
2. Place the appliance on a stable level surface.
D) Filling with water.
1. Switch the main switch (4) to the OFF position
and remove the mains plug from the wall socket
before filling the water tank.
2. Open the water inlet lid (9).
3. Use the provided beaker to fill the tank with
water.
4. Fill the tank with water until the MAX-mark.
Important
Normal tap water can be used. If the water in
your region is very hard we advise you to mix it
with an equal amount of distilled or deminerali--
sed water. This will prolong the optimal steam
function of the steam station. You can inquire
about the water hardness with your local water
supplier.
Never use distilled water exclusively
To avoid any damage and or contamination of
the system, do not put in any perfume, vinegar,
starch or other type of chemical into the water
tank.
Do not use condensation water from tumble
dryers, fridges or the like.
E) Setting the temperature
1. Check the ironing instruction label on the
garment to determine the correct ironing tem--
perature
2. Place the iron on the iron stand (16).
3. Insert the mains plug into the mains supply and
then set the main switch (4) either to the DRY
IRON or STEAM IRON position.
4. Select the right temperature on the iron by
rotating the temperature dial (12)
Synthetics
•• Silk/Wool
••• Cotton / Linen
5. The steam function ready light will flash during
heating up taking approximate 2 3 minutes.
(For first time use, the pre-heating time can
be 4 minutes.)
Tips:
Sort your garments out based on their cleaning
symbol labels. Always starting ironing with clothes
en
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bosch tds 1526 sensixx b15l at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bosch tds 1526 sensixx b15l in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 3,96 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info