Manual Bosch tds 1526 sensixx b15l (page 10 of 106) (English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish)

323608

Zoom out

Zoom in

1/106

General safety instructions

Important !

• Read these instructions for use carefully

before using the appliance and save them

for future reference.

• This appliance complies with international

safety standards

• Before using for the first time, check if the

voltage rating on the type plate corresponds to

the mains voltage in your home. This appliance

must be connected to an earthed socket.

• If it is absolutely necessary to use an extension

cable, make sure that it is suitable for 10 A or

more and has a socket with an earth connec--

tion.

• This appliance must only be used for the

purposes it was designed, i.e. as an iron. Any

other use will be considered as improper and

consequently dangerous. The manufacturer will

not be held responsible for any damage arising

from misuse or improper use.

• The electrical plug must not be removed from

the socket by pulling the cable.

• Do not leave the appliance exposed to weather

conditions ( rain, sun , frost, etc ).

• Do not leave the appliance unattended while it

is plugged in.

• Keep the appliance out of children’s reach.

• This appliance is not intended to be used by

persons (including children) with reduced phy-

sical, sensory or mental capacities, or lack of

experience and knowledge, unless they have

been given supervision or instruction concerning

use of the appliance by a person responsible for

their safety.

• Children should be supervised to ensure that

they do not play with the appliance.

• Remove the plug from the socket before filling

the appliance with water or before pouring out

the remaining water after use.

• Never immerse the iron or the station in water

or any other fluid.

• The appliance must never be placed under the

tap to fill with water.

• When you have finished ironing, and also when

leaving the iron even for a short while:

- set variable temperature dial to minimum.

- switch the main switch to the –off- position.

- place the iron on its support on the appli-

ance.

- remove the mains plug from the wall so-

cket.

• Some parts of the iron have been slightly gre-

ased and as a result the iron may smell slightly

when switched on for the first time. After a short

while, however, this will cease.

• Before using the iron for the first time remove

any sticker or protective foil from the soleplate.

Clean the soleplate with a soft cloth.

• Do not put vinegar or other descaling agents

into the water tank.

• Do not use distilled water exclusively.

• Do not try to repair any part of the steam station

on your own.

• If the supply cord is damaged, it must be re-

placed by the manufacturer or its service agent

or a similarly qualified person in order to avoid

a hazard.

• When turned on for the first time, your new iron

may smell for up to 10 minutes. This is due to

the initial heating of the used materials. The

odor is safe and should not reoccur after initial

heating. Moreover, the iron may emit some small

particles from the steam holes. This is normal

and will not occur after several times using the

¨steam¨ function.

• Do not aim iron at other persons or towards

yourself, while using the ¨steam¨ function.

• The filling lid must not be opened during use.

• The appliance must be used and placed on a

stable surface.

• When placed in a support, make sure that the

surface on which the support stands is stable.

• The iron should not to be used if it has been

dropped, if there are visible signs of damage or

if it is leaking water. It must be checked by an

authorized Technical Service Centre before it

can be used again.

• Do not allow the mains cord and the supply hose

to come into contact with the soleplate when it

is hot.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Bosch tds 1526 sensixx b15l in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 3,96 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Bosch tds 1526 sensixx b15l Manual

Product: