120602
19
Zoom out
Zoom in
Previous page
1/93
Next page
15
Preparing hot water
The appliance must be ready for use. This
function allows water to be heated for a cup
of tea, for example.
! Risk of burns
The nozzle gets very hot. Do not touch the
metal parts!
●Placeanappropriatecupunderthe
nozzle 9.
●Pushthesleeveonthenozzle9 all the
way down.
●Turnthedial8 to g/h.
! Risk of scalding
When the dial 8 is set to g/h, the nozzle
may sputter a little. Do not touch the nozzle
9 or aim it at anyone.
●Endtheprocessbyturningthedial8
back to O.
Steam for foaming milk
The appliance must be ready for use. You
canfoamthemilkrstandaddthecoffee
on top, or foam the milk separately and
pour it into the coffee.
! Risk of burns
The nozzle gets very hot. Do not touch the
metal parts!
●Pushthesleeveonthenozzle9 all the
way down.
●Fillthecupapproximately1/3fullofmilk.
●Pressthehbutton.Itwillstarttoash.
i The appliance will heat up for approx. 20
seconds.
●Immersethenozzle9 deep into the milk,
but do not let it touch the bottom of the
cup.
●Whentheh button lights up and 8
appears on the display, turn the dial 8 to
g/h.
! Risk of scalding
When the dial 8 is set to g/h, the nozzle
9 may sputter. Escaping steam is very hot
and may cause liquids to sputter. Do not
touch the nozzle 9 or aim it at anyone.
●Rotatethecupslowlyuntilthemilkisfully
foamed.
●Endtheprocessbyturningthedial8
back to O.
Note: When the nozzle 9 has cooled
down, clean it immediately. Dried residue is
difculttoremove.
Tip: If possible, use cold low-fat (1.5% fat)
milk.
Steam for heating drinks
! Risk of burns
The nozzle gets very hot. Do not touch the
metal parts!
The appliance must be ready for use.
●Pushthesleeveonthenozzle9 all the
way up.
●Pressthehbutton.Itwillstarttoash.
i The appliance will now heat up for
approx. 20 seconds.
●Immersethenozzle9 deep into the liquid
you want to heat.
●Whentheh button lights up and 8
appears on the display, turn dial 8 to g/
h.
! Risk of scalding
When the dial 8 is set to g/h, the nozzle
9 may sputter a little. Escaping steam is
very hot and may cause liquid to sputter.
Do not touch the nozzle 9 or aim it at
anyone.
●Endtheprocessbyturningthedial8
back to O.
Note: When the nozzle 9 has cooled down,
cleanimmediately.Driedresidueisdifcult
to remove.
en
19


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bosch TCA5401CH at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bosch TCA5401CH in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 1,78 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info