Manual Bosch TA 211E (page 15 of 68) (English, German, Dutch, Danish, French, Italian, Portuguese, Spanish)

458026

Zoom out

Zoom in

1/68

TA 211 E

English

7.3.3 Night Reduction (d)

In the position (frost protection), the heat-

ing unit remains switched off as long as the

outside temperature is above +4 °C. Burner

and pump are not in operation (see

Section 7.2).

The night reduction determines by how many

K (°C). The heating curve is shifted parallel

downward in reduced operation (the broken

line in Fig.

). Values between 0 and – 40 K

(°C) can be set.

Select a setting with which the desired

temperature reduction is achieved.

Note: A reduction of the flow temperature by

5 K (°C) results in approx. 1 K (°C)

room temperature reduction.

7.4 TA 211 E with Time Switch and TW 2

Remote Control (Accessory) (not in UK)

The TW 2 Remote Control is effective only

when the operating mode switch (b) of the

TA 211 E is in the position . If this is the

case, the operating mode can be set with the

operating mode switch on the remote control.

Set the base point for normal operation and

night reduction as described in Section 7.3.

In the position of the operating mode

switch on the TW 2 , a fixed reduction value

of 25 K (°C) is pre-programmed. The reduc-

tion value set on the adjustment knob of

the TA 211 E is not effective in this case.

Should the reduction value of 25 K (°C)

be too high or too low for longer absences, the

operating mode switch (b) of the TA 211 E

can be temporarily set to the position and

any desired reduction value selected on the

knob (d).

A detailed functional description can be found

in the operating instructions of the TW 2.

7.5 TA 211 E with TFQ 2 or TFP 3

Remote Control (Accessory) (not in UK)

The remote control is effective only when the

operating mode switch (b) of the TA 211 E is

either in the position . The operating mode

can then be set exclusively by means of the

operating mode switch on the remote control.

Note: The degree of flow temperature re-

duction is also set exclusively on

the TFQ 2/TFP 3.

A detailed functional description is provided

with the remote control.

8 Programming the time switch

(Accessory)

The TA 211 E is delivered without a time

switch.

For the operation of the time switch, refer to

the associated operating instructions.

9 General Notes

Heating units that can be operated with the

TA 211 E Regulator are equipped with an au-

tomatic device that limits the switching fre-

quency in two-point operation of the burner.

For more detailed information, refer to the in-

stallation instructions of the heating unit.

A frost protection circuit is also built into the

switching box of the heating unit that keeps

the flow temperature above +10 °C.

10 Malfunction

A malfunction of the regulator or a faulty con-

nection are indicated with an error code on the

control panel. The following error codes are

caused by the regulator TA 211 E:

• “AC” Contact failure or malfunction of the

regulator.

• “CC” Contact failure or defect external tem-

perature sensor.

-40 -10

-30 -20

☞

Tip

☞

Tip

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Bosch TA 211E in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 0,65 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Bosch TA 211E Manual

Product: