794392
8
Zoom out
Zoom in
Previous page
1/9
Next page
English | 44
Updating
A current version of the operating instructions – which
describes all functions added by the device update – can be
downloaded at www.spexor-bosch.com.
Updating the app
If an app update is available, you will automatically receive a
message on your smartphone.
Just follow the instructions of the operating system on
your phone to update the app.
If the app freezes and you can no longer enter data, please
contact customer service; see page 48.
English | 45
Storage
If you do not need spexor, switch it off at the ON/OFF
switch.
Three short, falling signal tones confirm that the device
is switching off. After switching off, the LEDs light up red
briefly.
Note the storage temperature range; see “Technical Data”
on page 20.
English | 46
Maintenance
spexor operates maintenance-free.
– Note –
Modifications to the alarm device can result in hazard-
ous damage to the battery, short circuit and malfunc-
tion. Do not modify the alarm device in any way. Do not
open the alarm device. The alarm device does not contain
any components that you can maintain or replace.
If your device does not function as described or if your
spexor is damaged, please contact customer service; see
page 48.
Maintenance and service
English | 47
Maintenance and service
Cleaning
– Note –
Risk of damage! Penetrating water or chemicals can
damage or destroy the alarm device. Do not use either
water or chemicals to clean the alarm device.
It is best to use a soft, clean, dry and lint-free cloth to
clean the alarm device, cable and power supply unit.
English | 42
Updating
Restart
Deactivate the monitoring; see “Deactivate monitoring”
on page 36.
Press and hold the ON/OFF switch for 3 seconds until
the LEDs light up red and three short, falling signal tones
confirm the deactivation.
In some cases, restarting may cause settings to be lost.
Switch spexor on again at the ON/OFF switch.
An acoustic signal confirms that the device has been
switched on.
English | 43
Updating
Device update
Spexor can be equipped with updates via WLAN. The status
of the device updates can be found in the app.
Deactivate monitoring; see “Deactivate monitoring” on
page 36.
Use the USB cable to connect spexor’s Micro-USB port to
the power supply unit. Then plug the power supply unit
into the mains power.
Follow the instructions in the app.
You can also follow in the app the status of updates
currently running.
If the status of the currently running update remains
frozen at 99%, perform a restart; see “Restart” on page
42.
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bosch Spexor at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bosch Spexor in the language / languages: English as an attachment in your email.

The manual is 1.5 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Bosch Spexor

Bosch Spexor Quick start guide - German - 2 pages

Bosch Spexor User Manual - German - 58 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info