794392
5
Zoom out
Zoom in
Previous page
1/9
Next page
English | 26
Commissioning
Fully charge spexor before using it for the first time.
This can take up to 8 hours depending on the ambient
conditions.
Launching the app
Start the app.
Log in with your e-mail address and password.
If you have forgotten your password, you can reset it in
the app.
You can now use the app to operate and configure spexor.
English | 27
Commissioning
Adding alarm devices
You can also control multiple alarm devices with your smart-
phone. There is no limit to how many. You can add more
alarm devices in the app. To do this, the alarm device to be
added must be turned on and the app must be running.
Scan the QR code contained in the Quick Start Guide
delivered with the alarm device to be added. If you do
not want to authorize access to your camera, you can
also manually enter the 8-digit device number of your
QRcode.
Safely store the Quick Start Guide with QR code so it can
be used later.
English | 28
The spexor app is the communication interface for your
alarm device. You can use it to monitor different states of the
alarm device everywhere, such as the battery charge.
You can also manage your user account information,
activate or deactivate monitoring or the alarm function, add
more alarm devices, use help topics, or book additional
features or services later.
Operation
English | 29
Monitoring
Placing it where you want to monitor
– Note –
Risk of damage! The alarm device is not protected
against moisture and water. Penetrating water or
moisture can damage or destroy the alarm device.
Keep the alarm device away from water or other liquids.
– Note –
Exposure to fire and heat! Excessive heat can damage
the battery or sensors. Protect the alarm device from heat
and keep it away from heat sources such as radiators or
stoves and from open flames.
English | 24
Commissioning
Load the app on any other smartphone and use the same
access data during installation.
Switching on alarm device
In its as-delivered condition, spexor is switched off and its
battery may be severely discharged.
Switch on spexor at its ON/OFF switch.
The battery needs a minimum charge for this. If the
battery charge is too low, spexor is automatically
switched on when the charging process begins.
An acoustic signal confirms the switch-on. After switching
on, the LEDs light up white briefly. While spexor boots up,
they light up green six times.
English | 25
Commissioning
Charging the battery
– Note –
Charge the battery of the alarm device only with the
charger supplied by the manufacturer. If a charger
designed for a particular type of battery is used with other
batteries, then there is a risk of fire.
During charging, the ambient temperature should be
between 0 °C and +40 °C.
Use the USB cable to connect the Micro-USB port of
spexor to the power supply unit.
Connect the power supply unit to the mains power.
The LEDs flash white three times sequentially around the
LED array bar thereby indicating the power supply unit has
been detected and the charging process has begun.
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bosch Spexor at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bosch Spexor in the language / languages: English as an attachment in your email.

The manual is 1.5 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Bosch Spexor

Bosch Spexor Quick start guide - German - 2 pages

Bosch Spexor User Manual - German - 58 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info