Manual Bosch PVS 300 AE (page 21 of 120) (English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish)

78609

Zoom out

Zoom in

1/120

English | 21

Bosch Power Tools 1 609 929 M21 | (22/8/07)

– Adjust the belt tracking with the adjustment

knob 5 (also see the arrows impressed on the

adjustment knob):

Note: Turn the adjustment knob 5 slowly and ob-

serve the reaction of the sanding belt before con-

tinuing with the adjustment.

The belt tracking is properly adjusted when the

sanding belt runs flush to the edge of the sliding

shoe.

Selecting the Sanding Belt

Depending on the material to be worked and the

required rate of removal, different sanding belts

are available:

Operation

Starting Operation

f Observe correct mains voltage! The voltage

of the power source must agree with the

voltage specified on the nameplate of the

machine. Power tools marked with 230 V can

also be operated with 220 V.

Switching On and Off

– To start the machine, push the On/Off switch

3 towards the front to “I”.

– To switch off the machine, push the On/Off

switch 3 towards the rear to “0”.

Preselecting the Belt Speed

The required belt speed depends on the material

being sanded and on the working conditions, and

can be determined by practical testing.

– Set the thumbwheel 2 to the requested belt

speed.

Note: The belt speed can also be readjusted dur-

ing operation.

Operating Instructions

The sanding removal rate and the surface quality

are mainly determined by the selection of the

sanding belt as well as by the preselected belt

speed . The higher the belt speed, the more ma-

terial is removed and the finer the sanded sur-

face.

Only flawless sanding belts achieve good sanding

capacity and make the machine last longer.

A sanding belt used for sanding metal should not

be used for other materials.

Use only original Bosch sanding accessories.

Rotational direction Belt tracking

In clockwise

direction

(toward the rear)

Away from the adjust-

ment knob

(toward the right)

In anticlockwise

direction

(toward the front)

Toward the adjust-

ment knob

(toward the left)

Red: Wood

For working wooden

materials

Grain size

For coarse-sanding, e. g.

of rough, unplaned beams

and boards

coarse 40, 60

For face sanding and plan-

ing small irregularities

medium 80, 120

For finish and fine sanding

of hard woods

fine 180, 240

Blue: Metal

For working metal

materials

Grain size

For removal of scales and

rust, as well as for sand-

ing out small irregularities

coarse 60

For deburring and gloss-

ing steel sheet and pre-

formed parts

medium 80, 120

For precision and struc-

tural sanding

fine 180, 240

OBJ_BUCH-472-001.book Page 21 Wednesday, August 22, 2007 5:20 PM

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Bosch PVS 300 AE in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 4,19 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Bosch PVS 300 AE Manual

Product: