Manual Bosch PVS 300 AE (page 20 of 120) (English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish)

78609

Zoom out

Zoom in

1/120

1 609 929 M21 | (22/8/07) Bosch Power Tools

20 | English

Assembly

f Before any work on the machine itself, pull

the mains plug.

Auxiliary Handle

The auxiliary handle 8 enables convenient han-

dling and optimal distribution of power, especial-

ly at high removal rates.

– Screw the auxiliary handle into the corre-

sponding threaded hole 9 in the housing.

Dust/Chip Extraction

Dusts from materials such as lead-containing

coatings, some wood types, minerals and metal

can be harmful to one’s health. Touching or

breathing-in the dusts can cause allergic reac-

tions and/or lead to respiratory infections of the

user or bystanders.

Certain dusts, such as oak or beech dust, are

considered as carcinogenic, especially in connec-

tion with wood-treatment additives (chromate,

wood preservative). Materials containing asbes-

tos may only be worked by specialists.

– Use dust extraction whenever possible.

– Provide for good ventilation of the working

place.

– It is recommended to wear a P2 filter-class

respirator.

Observe the relevant regulations in your country

for the materials to be worked.

External Dust Extraction

You can either attach a vacuum hose or a Bosch

all-purpose vac with remote starting control to

the vacuum connection 1.

Connecting a

Ø 35 mm vacuum hose:

– Attach a suitable adapter to the vacuum con-

nection 1.

– Connect the adapter with the vacuum hose

(

Ø 35 mm) of a vacuum cleaner.

Connecting a

Ø 19 mm vacuum hose:

– Firmly attach the vacuum hose (Ø 19 mm) to

the vacuum connection 1.

– Attach a suitable adapter to the vacuum hose

and connect to a vacuum cleaner.

The vacuum cleaner must be suitable for the ma-

terial being worked.

When vacuuming dry dust that is especially detri-

mental to health or carcinogenic, use a special

vacuum cleaner.

Changing the Sanding Belt

f Before any work on the machine itself, pull

the mains plug.

Removing the Sanding Belt (see figure B1)

– Swing down the clamping lever 6.

– Pull off the loose sanding belt 4 to the side.

Fitting a New Sanding Belt (see figure B2)

Before fitting the new sanding belt, clean the

sliding shoe 10, the guide roller 11 and the ten-

sioning roller 12, if required.

– Select a new sanding belt with the requested

grit.

Application examples, see “Selecting the

Sanding Belt”, page 21.

– Mount the new sanding belt 4.

– To tension the sanding belt, swing up the

clamping lever 6 until it can be heard to en-

gage.

– Adjust the belt tracking. (see “Adjusting the

Belt Tracking”, page 20)

Note: Sanding belts used up on one side can be

turned by 180°, as sanding is possible in both ro-

tation directions due to the special bond.

Adjusting the Belt Tracking

(see figure C)

To ensure that the sanding belt always runs

against the same area of the sliding shoe and

does not "run off" to the side, the belt tracking

must be adjusted each time after changing the

sanding belt.

– Set the thumbwheel 2 to “1” (low belt speed).

– To start the machine, push the On/Off switch

3 towards the front to “I”.

OBJ_BUCH-472-001.book Page 20 Wednesday, August 22, 2007 5:20 PM

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Bosch PVS 300 AE in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 4,19 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Bosch PVS 300 AE Manual

Product: