766883

Bosch PTK 14 EDT Manual

12
Zoom out
Zoom in
Previous page
1/67
Next page
12 | English
Preselecting the Impact Force
Various settings for the required impact force can be
preselected with the thumbwheel(5) for impact force
preselection.
The impact force required depends on the length of the
staples or nails and the strength of the material.
When using two staples (DuoTac function), the setting on
the thumbwheel(5) for the impact force must be set approx-
imately one level higher.
Note: Always test the selected impact force on a spare piece
of material first. The optimal impact force setting can only be
achieved through practice.
The figures in the table below are recommended values.
Setting Range for Thumbwheel
6 8 10 12 14 mm
14 mm
Substrate
Softwood
(pine) 1−3 3
Hardwood
(beech) 3−5 6
Chipboard 2−4 4
Wood core ply-
wood 2−4 4
6 8 10 12 14 mm
DuoTac
Substrate
Softwood
(pine) 2−4
Hardwood
(beech) 4−6
Chipboard 4−6
Wood core ply-
wood 4−5
Practical Advice
u19mm staples cannot be used with this power tool.
Therefore you should not use the power tool to attach
ceiling panels with claws for fastening wooden pro-
files or joints.
Avoid pulling the trigger when the magazine is empty to min-
imise wear on the firing pin.
When work is complete, set the impact force on the thumb-
wheel for impact force preselection(5) to relieve strain on
the tension spring.
Carefully set the tacker head (1) down on the material. Soft
workpieces (e.g. pine wood) could be damaged if you press
down too hard.
The power tool is designed for short-term use and heats up
in continuous operation. Performance reduces as the tem-
perature increases. The S2 operating mode denotes short-
term operation with a maximum operation time of
10minutes of constant use.
Switch the power tool off after this time and allow it to cool
down.
Removing Jammed Staples
uPull the plug out of the socket before carrying out any
work on the power tool.
– Turn the power tool around.
– Press the magazine release(6) and pull the magazine(9)
out of the back of the tool at the same time.
– Remove the jammed staple. Use a pair of pliers for this, if
required.
– Slide the magazine(9) back in until it clicks into place.
uFill the magazine in good time. A staple strip that is too
short may be the cause of jammed staples.
Maintenance and Service
Maintenance and Cleaning
uPull the plug out of the socket before carrying out any
work on the power tool.
uTo ensure safe and efficient operation, always keep
the power tool and the ventilation slots clean.
In order to avoid safety hazards, if the power supply cord
needs to be replaced, this must be done by Bosch or by an
after-sales service centre that is authorised to repair Bosch
power tools.
After-Sales Service and Application Service
Our after-sales service responds to your questions concern-
ing maintenance and repair of your product as well as spare
parts. You can find explosion drawings and information on
spare parts at: www.bosch-pt.com
The Bosch product use advice team will be happy to help you
with any questions about our products and their accessor-
ies.
In all correspondence and spare parts orders, please always
include the 10‑digit article number given on the nameplate
of the product.
Great Britain
Robert Bosch Ltd. (B.S.C.)
P.O. Box 98
Broadwater Park
North Orbital Road
Denham Uxbridge
UB 9 5HJ
At www.bosch-pt.co.uk you can order spare parts or arrange
the collection of a product in need of servicing or repair.
1 609 92A 661 | (18.01.2021) Bosch Power Tools
… 12 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bosch PTK 14 EDT at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bosch PTK 14 EDT in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Turkish, Spanish, Norwegian as an attachment in your email.

The manual is 1,65 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info