Manual Bosch PST 18 LI (page 24 of 159) (English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish)

460538

Zoom out

Zoom in

1/159

24 | English

2 609 004 236 | (5.5.10) Bosch Power Tools

Saw Blade Storage (see figure D)

Up to six saw blades with lengths to 110 mm can

be stored in the saw blade storage 8. Insert the

saw blades with the T-shank into the recess of the

saw blade storage intended for this. Up to three

saw blades can be placed on top of each other.

Shut the saw blade storage and slide it to the

stop into the opening of the base plate 9.

Splinter Guard (see figure E)

The splinter guard 20 (accessory) can prevent

fraying of the surface while sawing wood. The

splinter guard can only be used for certain saw

blade types and only for cutting angles of 0°.

When sawing with the splinter guard, the base

plate 9 must not be moved back for cuts that are

close to the edge.

Press the splinter guard 20 from below into the

base plate 9 (with the notch facing upward as

shown in the figure).

“Cut Control”

“Cut Control” enables precise guiding of the

power tool along a cutting line marked on the

workpiece. The “Cut Control” kit includes the

viewing window 15 with cutting marks and the

base 13 for attachment to the power tool.

Attaching “Cut Control” to the Base Plate

(see figure F)

Clamp the “Cut Control” 15 viewing window in-

to the holders of the base 13. Then, lightly press

the base together and allow it to engage into the

lead 21 of the base plate 9.

Dust/Chip Extraction

f Dusts from materials such as lead-containing

coatings, some wood types, minerals and

metal can be harmful to one’s health. Touch-

ing or breathing-in the dusts can cause aller-

gic reactions and/or lead to respiratory infec-

tions of the user or bystanders.

Certain dusts, such as oak or beech dust, are

considered as carcinogenic, especially in

connection with wood-treatment additives

(chromate, wood preservative). Materials

containing asbestos may only be worked by

specialists.

– Use dust extraction whenever possible.

– Provide for good ventilation of the work-

ing place.

– It is recommended to wear a P2 filter-

class respirator.

Observe the relevant regulations in your

country for the materials to be worked.

Dust Cover (see figures G–H)

Mount the dust cover 11 before connecting the

machine to the dust extraction.

Mount the dust cover 11 onto the machine in

such a manner that the centre holder engages

on the contact protector 16 and the two outer

holders engage in the openings on the casing.

Remove the dust cover 11 for applications with-

out dust extraction as well as when performing

mitre cuts. For this, push the dust cover togeth-

er at the two outer holders and pull it off toward

the front.

Connecting the Dust Extraction

Place a vacuum hose 6 (accessory) onto the vac-

uum connection 7. Connect the vacuum hose 6

with a vacuum cleaner (accessory). An overview

for the connection of various vacuum cleaners

can be found at the end of these instructions.

To enable optimum dust extraction, use the

splinter guard 20 if possible.

The vacuum cleaner must be suitable for the ma-

terial being worked.

When vacuuming dry dust that is especially det-

rimental to health or carcinogenic, use a special

vacuum cleaner.

Operation

Operating Modes

f Before any work on the machine itself (e. g.

maintenance, tool change, etc.) as well as

during transport and storage, remove the

battery from the power tool. There is danger

of injury when unintentionally actuating the

On/Off switch.

OBJ_BUCH-1204-001.book Page 24 Wednesday, May 5, 2010 8:13 AM

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Bosch PST 18 LI in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 7,19 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Bosch PST 18 LI Manual

Product: