473381
8
Zoom out
Zoom in
Previous page
1/60
Next page
English - 1
The numbering of the machine elements refers to
the illustration of the machine on the graphics
page.
1 Gear selector
2 Torque setting ring
3 Keyless chuck
4 On/Off switch
5 Rotational direction switch
6 Screwdriver blade*
7 Battery*
8 Battery unlocking button
9 Soft grip
10 Screwdriver bit*
11 Universal bit holder*
12 Locking screw
13 Allen key*
* Not all of the accessories illustrated or described are
included as standard delivery.
Measured values determined according to
EN 60 745.
Typically the A-weighted sound pressure level of
the machine is less than 70 dB (A).
The noise level when working can exceed
85 dB (A).
Wear hearing protection!
The typical hand/arm vibration is below 2.5 m/s
2
.
Read all instructions. Failure to fol-
low all instructions listed below may
result in electric shock, fire and/or se-
rious injury.
Additionally, the general safety instructions either
in the enclosed booklet or those added in the
centre of these operating instructions must be ob-
served.
SAVE THESE INSTRUCTIONS.
Secure the workpiece. A workpiece clamped
with clamping devices or in a vice is held more
securely than by hand.
Do not work materials containing asbes-
tos. Asbestos is considered carcinogenic.
Take protective measures when dust can
develop during working that is harmful to
one's health, combustible or explosive. Ex-
ample: Some dusts are regarded as carcino-
genic. Wear a dust mask and work with dust/
chip extraction when connectable.
Keep your workplace clean. Material mix-
tures are particularly dangerous. Dust of light
metal can be inflammable or explode.
Always wait until the machine has come to
a complete stop before placing it down. The
tool insert can jam and lead to loss of control
over the power tool.
Tool Specifications
Cordless screwdriver PSR 12 PSR 14,4
Article number 3 603 J53 5.. 3 603 J53 4..
Rated voltage [V=] 12 14.4
No-load speed
1st gear [rpm] 0 390 0400
2nd gear [rpm] 0–1 250 0–1 250
Torque adjustment range [Nm] 0.7 9.0 0.7 9.0
Max. torque for hard/soft screwdriving
application according to ISO 5393
[Nm] 24/12 30/16
Maximum drilling Ø (1st/2nd gear)
Steel [mm] 10/10 10/10
Wood [mm] 20/19 28/20
Screw diameter, max. [mm] 6 7
Chuck clamping range [mm] 1–10 1–10
Drill spindle thread 3/8" 3/8"
Weight according to EPTA-Procedure 01/2003 [kg] 1.6 1.8
Please observe the article number on the type plate of your machine. The trade names of the individual machines may vary.
Machine Elements
Noise/Vibration Information
For Your Safety
2 609 932 475.book Seite 1 Dienstag, 14. Juni 2005 3:05 15
8 • 2 609 932 475 • TMS • 06.06.05
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bosch PSR 14-4 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bosch PSR 14-4 in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 1,9 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info