Manual Bosch PSR 14,4 LI (page 20 of 121) (English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish)

78414

Zoom out

Zoom in

1/121

2 609 002 498 | (7.1.08) Bosch Power Tools

20 | English

Dust/Chip Extraction

f Dusts from materials such as lead-containing

coatings, some wood types, minerals and

metal can be harmful to one’s health. Touch-

ing or breathing-in the dusts can cause aller-

gic reactions and/or lead to respiratory infec-

tions of the user or bystanders.

Certain dusts, such as oak or beech dust, are

considered as carcinogenic, especially in con-

nection with wood-treatment additives (chro-

mate, wood preservative). Materials contain-

ing asbestos may only be worked by

specialists.

– Use dust extraction whenever possible.

– Provide for good ventilation of the working

place.

– It is recommended to wear a P2 filter-class

respirator.

Observe the relevant regulations in your coun-

try for the materials to be worked.

Operation

Starting Operation

Inserting the Battery

f Use only original Bosch lithium ion batteries

with the voltage listed on the nameplate of

your power tool. Using other batteries can

lead to injuries and pose a fire hazard.

Set the rotational direction switch 9 to the centre

position in order to avoid unintentional starting.

Insert the charged battery 6 into the handle so

that it can be felt to engage and faces flush

against the handle.

Reversing the Rotational Direction

(see figure F)

The rotational direction switch 9 is used to re-

verse the rotational direction of the machine.

However, this is not possible with the On/Off

switch 10 actuated.

Right Rotation: For drilling and driving in screws,

push the rotational direction switch 9 left to the

stop.

The indicator for right rotation 4 lights up

when the On/Off switch 10 is actuated

and the motor is running.

Left Rotation: For loosening or unscrewing

screws, push the rotational direction switch 9

right to the stop.

The indicator for left rotation 5 lights up

when the On/Off switch 10 is actuated

and the motor is running.

Setting the Torque

The required torque can be preselected in 10+1

steps with the torque preselection ring 3. With

the correct setting, the insert tool is stopped as

soon as the screw is screwed flush into the ma-

terial or when the set torque is reached.

Select a higher setting when driving out screws,

or set to the symbol “Drilling”.

Drilling

The safety clutch is deactivated in the “Drilling”

position.

Switching On and Off

To start the machine, press the On/Off switch 10

and keep it depressed.

The power light 7 lights up when the On/Off

switch 10 is slightly depressed, and enables illu-

mination of the screwing location in unfavourable

light conditions.

To switch off the machine, release the On/Off

switch 10.

Adjusting the Speed

The speed of the switched on power tool can be

variably adjusted, depending on how far the

On/Off switch 10 is pressed.

Light pressure on the On/Off switch 10 results in

a low rotational speed. Further pressure on the

switch results in an increase in speed.

Fully automatic spindle locking (Auto-lock)

When the On/Off switch 10 is not pressed, the

drill spindle and thus the tool holder are locked.

This enables screws to be screwed in, even when

the battery is empty and allows for the machine

to be used as a screwdriver.

OBJ_BUCH-614-001.book Page 20 Monday, January 7, 2008 1:54 PM

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Bosch PSR 14,4 LI in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 3,72 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Bosch PSR 14,4 LI Manual

Product: